1/4 In Drive SAE Hex Bit Socket Sets
Hex bit sockets combine a socket drive with a fixed hex key tip, so internal hex, or Allen head, screws can be turned with a ratchet, extension or torque wrench. This category holds sets in fractional inch sizes with a 1/4 in. drive: stubby, standard and long sets, wobble or ball end sets for angled access, and a few combined 1/4 and 3/8 in. drive sets.
Choosing a set
Stubby sets fit where there is little room above the screw, such as behind panels and trim. Standard lengths cover most work, and long sets reach screws at the bottom of recesses. Wobble and ball end bits turn a screw from a few degrees off axis, which helps when a straight approach is blocked; use a straight bit for final tightening and for breaking tight screws loose. The 1/4 in. drive suits the small sizes, while larger hex sizes are better driven with 3/8 in. drive tools.
Using them
Push the bit fully into a clean recess before turning, and use the size that fits without play, since a loose fit rounds the screw.
Auto repair technicians use these sets on interior, trim and engine fasteners, and they are common in motorcycle, small engine, machinery and industrial maintenance work. Brands here include Genius, Williams, NEPROS, VIM and Proto. Single bits are in Individual under 1/4 In Drive socket bits, SAE.


















































Follow us on social media