3/8 In Drive Metric Crowfoot Wrenches
A crowfoot wrench is a wrench head with a square drive hole in place of a handle. It snaps onto a ratchet, extension or torque wrench so you can reach nuts and fittings that a socket cannot slide over or that sit behind other parts, such as line fittings, injector lines, manifold nuts and fasteners behind brackets. This category holds individual 3/8 in. drive metric crowfoot wrenches, mostly open end, so you can buy just the size a job needs or replace one lost from a set.
Using a crowfoot on a torque wrench
A crowfoot is one of the few ways to torque a fitting that a socket cannot reach. Because it adds length to the wrench, it changes the torque the fastener actually receives. Mounting the crowfoot at a right angle to the torque wrench keeps the effective length the same, so the setting can be used as is. Mounted in line, the reading must be corrected for the added length.
What to look for
Open end crowfoots slide on from the side and turn hex nuts in tight spaces. For soft line nuts, a flare nut style that wraps more of the nut is less likely to round it. Pick the drive size that matches your torque wrench to avoid stacking adapters.
Auto repair technicians, fleet and diesel shops, aviation and industrial maintenance techs use them. Brands here include Williams, Proto, V8, GearWrench and Martin. The 1/2 in. drive and 1/4 in. drive individual crowfoot wrenches are in the sibling categories.




















































Follow us on social media