Soft Face Hammers and Replacement Tips
A soft face hammer strikes with a face that is softer than the part being hit, so it can seat, align or loosen a part without denting, chipping or marking it. That makes it the hammer of choice for machined parts, finished surfaces, bearings, shafts, trim and sheet metal. This category holds soft face hammers with rawhide, nylon, plastic and composite faces, split-head hammers that take two screw-in tips, and replacement faces and tips. Industrial maintenance and millwright crews, machine shops, auto repair technicians, body shops and assembly lines all use them.
Choosing the face
Each face material gives a different feel. Rawhide gives a firm blow and leaves almost no mark. Nylon and other plastic faces resist wear and come in soft and hard grades. Composite and cast hammers have a weighted head that cuts rebound, so more of the blow goes into the part. Many split-head hammers let you fit a soft face on one side and a harder face on the other, then replace each one as it wears. Some heads here are sold by face diameter, such as 1-1/2 in. or 1-3/4 in., and others by head weight.
When to use one
Use a soft face hammer to tap a bearing or bushing into place, to align a machined part on dowels, to free a stuck panel or cover, or to adjust trim without damaging paint. For heavy driving on steel, a ball peen, sledge or brass hammer is the better choice.
Care
Replace a face once it is split, chunked or worn to the holder, because a damaged face can mark the part. Keep spare tips for the hammer size you use most.
Brands we carry here include Williams, Vaughan, Proto, Bahco and Trusty-Cook. Dead blow, brass and body hammers have their own categories next to this one.













































Follow us on social media