Individual SAE Combination Wrenches
A combination wrench has an open end on one side and a box end of the same size on the other. The box end grips all the way around to break a fastener loose, and the open end slides on from the side to spin it off quickly. This page lists SAE (fractional inch) combination wrenches one size at a time, for replacing a lost wrench, adding a second wrench of the same size to hold a nut while you turn the bolt, or reaching sizes beyond a typical set.
Choosing the right wrench
Box ends come in 6 point and 12 point. Six point box ends hold the flats and resist rounding on tight or worn fasteners, while 12 point ends need less swing to catch the next position in cramped spaces. Pattern matters too: stubby wrenches fit where a full length wrench cannot swing, standard lengths cover everyday work, and long pattern wrenches give more leverage. The range runs from small stubby sizes up to jumbo wrenches over 2 in. for heavy equipment and industrial fasteners, and some box ends are offset to keep your knuckles off the work.
Using them
Pull a wrench toward you rather than pushing it when you can, so your hand does not hit something if the fastener lets go. Use the box end for the first break and the final tightening, and save the open end for running the nut. Do not lengthen a combination wrench with a pipe; for stubborn fasteners, move to a socket and breaker bar. Keep wrenches clean and dry so they do not slip in an oily hand.
Auto repair technicians, fleet and diesel shops, heavy equipment mechanics and industrial maintenance crews use these wrenches daily on SAE fasteners. For matched runs of sizes, see the Sets category alongside this one.
Brands we carry here include Williams, Genius, Proto, Martin, K Tool and Sunex.

















































Follow us on social media