Engine Timing Tools
Engine timing tools hold the camshafts and crankshaft in their correct positions while a timing belt, chain, tensioner or sprocket is replaced. Auto repair technicians, dealer service departments and engine rebuilders use them on overhead cam engines, where a cam that turns out of time can let valves and pistons meet. This category includes timing kits for Ford, Audi and Opel/Vauxhall engines, along with synchro and alignment tools.
How they work
Cam locking plates or bars fit into slots or onto flats on the camshafts and hold them in place. Crankshaft locking pins go through a hole in the block and stop the crank at a set point, and holding tools keep sprockets from turning while bolts are loosened and torqued. With every shaft locked, the old belt or chain can come off and the new one go on without losing the relationship between cam and crank.
Choosing a kit
Most timing tools are made for one engine family or one vehicle make, and the kit name lists the engines it covers. Match the kit to the engine code, not just the make, since one maker can use several different designs. Master kits cover a range of engines from one maker in one case. Always follow the service information for the engine for the locking points and the order of work.
Brands here include Gedore, CTA, Lisle, OTC, Assenmacher and Kent-Moore. Belt tensioning tools and cam tools are in Belt Tensioning Tools and Camshaft Tools under Engine Repair Tools.

















































Follow us on social media