3/8 In Drive Tamperproof Torx Bit Sockets
Tamperproof Torx bit sockets, also called security or pin-in-star bit sockets, have a hole drilled in the tip of the star bit. The hole clears the pin in the center of a security Torx screw, which a standard Torx bit cannot fit past. This category holds single 3/8 in. drive tamperproof bit sockets sold by T size, in short, medium and long overall lengths.
Where they are used
Pin-in-star screws are used where a maker wants to discourage casual removal. Auto repair technicians meet them on sensors, modules, lamps and trim parts, and the same screws show up on appliances, electronics, vending machines and equipment covers that industrial maintenance crews service.
Choosing a length and size
Short sockets give the most control and fit where clearance above the screw is tight. Longer sockets reach screws at the bottom of deep recesses and through openings in covers. Match the T size to the screw so the bit fills the recess; a bit one size small will cam out and damage the screw. Buying single sizes replaces a lost or worn bit without buying a full set again.
All sockets here are from Genius. Standard Torx bit sockets in this drive size are in Individual and Sets under 3/8 In Drive Torx socket bits.













































Follow us on social media