Metric Striking and Slugging Wrenches
Striking wrenches, also called slugging or hammer wrenches, are short, heavy box end wrenches with a solid striking face on the end of the handle. Instead of pulling on a long handle, you strike the face with a hammer to break loose or seat large nuts and bolts. This category holds metric sizes, including straight and offset patterns and impact ring wrenches made to DIN 7444.
Where they are used
They are standard tools on flanges, heavy equipment, structural steel, pumps, valves and industrial machinery, where fasteners are big and tight and there is often little room for a long breaker bar. The box end surrounds the nut, so each blow goes into the fastener evenly instead of spreading the jaws as it would on an open wrench.
Choosing and using them
Pick the metric size that matches the nut across the flats, and choose a straight or offset pattern for the clearance around it; an offset handle lifts the striking face above nearby surfaces. Use a heavy hammer or sledge suited to striking tools, keep hands clear of the striking face and wear eye protection. An ordinary wrench is not made to be struck and should not stand in for one of these.
These wrenches are used by industrial maintenance and plant crews, pipefitters and heavy equipment mechanics. Brands here include Williams, Kukko and Martin. SAE sizes are in the SAE category alongside this one.
































.jpeg)

Follow us on social media