Individual SAE Flare Nut Wrenches
A flare nut wrench, also called a line wrench, has a box-like end with a narrow opening. The opening slips over a tube, then the wrench closes around the fitting and grips it on more sides than an open end wrench can. That helps prevent rounding the soft brass and steel nuts on brake lines, fuel lines, transmission cooler lines, power steering and hydraulic fittings. This category holds individual SAE sizes, so you can replace one lost wrench or add a size your set does not include.
Choosing the right wrench
Most wrenches here are double head, with a different size on each end, such as 3/8 x 7/16 in. or 1/2 x 9/16 in. Larger fittings are covered by single size wrenches. 6 point flare nut wrenches grip the flats of the nut for the most holding power on tight or corroded fittings. Match the size exactly; a loose fit is the main cause of rounded line nuts.
Using them
On a line connected to a component, hold the fitting body with a second wrench while you turn the flare nut, so the line does not twist. Penetrating oil and steady pressure work better than jerking on old, rusted fittings.
Auto repair technicians, brake shops, fleet and diesel shops and hydraulic service techs are the main users. Brands here include Williams, SK, Martin, OTC, V8 and Sunex. SAE flare nut wrench sets are in the sibling category.


















































Follow us on social media