3/8 In Drive socket bits
3/8 in. drive bit sockets and bit socket sets with Torx, tamper-proof Torx, SAE hex, metric hex and Triple-Square XZN tips.
Similar Categories
Featured Products - 3/8 In Drive socket bits
Best Selling Products - 3/8 In Drive socket bits
3/8 In. Drive Socket Bits
A socket bit, also called a bit socket, is a bit held in a socket body with a 3/8 in. square drive, so it runs on a ratchet, extension or torque wrench and turns fasteners with an internal drive recess. 3/8 in. drive is the everyday size for engine, brake, interior and body fasteners on cars and light trucks. This category has four groups: Torx, the largest, including tamper-resistant Torx; SAE hex; Metric hex; and Triple-Square (XZN). It holds individual bit sockets in several lengths as well as sets. Auto technicians, motorcycle and equipment mechanics, assembly and maintenance crews and home mechanics use them where a screwdriver cannot apply enough torque.
Choosing the drive type
Torx fasteners have a six-lobe star recess and are common on modern vehicles, from interior trim to brakes and engines. Tamper-resistant Torx has a center pin in the recess and needs a bit with a matching hole. Hex bits drive socket head cap screws; pick SAE or metric to match exactly, since close sizes can strip the recess. Ball hex bits enter at a slight angle for hard-to-reach screws. Triple-Square fasteners have a twelve-point recess and turn up mainly on European vehicles, often on axles and driveline parts.
Length and fit
Short bits keep the ratchet close to the work for the most control; longer bits, in the extended lengths given in product names, reach recessed bolts in calipers, housings and cylinder heads. Seat the bit fully in the recess before applying force and clean out rust, paint or dirt first, since a partly engaged bit rounds both the bit and the fastener. Use impact-rated bit sockets on impact tools, and replace bits with worn or twisted tips.
Brands we carry here include Genius, SK, VIM, Williams, Lisle and NEPROS.













.jpeg)








Follow us on social media