Safety Wire Twister Pliers
Safety wire, also called lock wire, is threaded through holes drilled in bolt heads, nuts and plugs and twisted so the fastener cannot back out under vibration. Safety wire twister pliers make that twist fast and even. The jaws lock onto both strands, and pulling the knob at the end of the handles spins the pliers so the wire winds into a tight, uniform braid. The jaws also cut the wire to length when the job is done.
Choosing a twister
Reversible pliers twist in either direction, so the wire can be pulled tight toward the side that tightens the fastener. Length matters: longer pliers give more reach and leverage, while shorter ones fit into crowded engine bays. Some tools combine twister and cutter functions in one, and shops that safety wire often keep more than one size on hand.
Using them
Route the wire so its pull works in the tightening direction of the fastener, twist to an even lay without overtwisting, and finish with a short, bent-back pigtail so the cut end cannot snag hands or hoses.
These pliers are used in aircraft maintenance, racing and motorsport shops, motorcycle work and industrial maintenance, wherever drain plugs, caliper bolts and other fasteners must be secured.
Brands here include Wright Tool, Williams, VIM, Proto and OTC. For general cutting pliers, see Side Cutting Pliers and Needle Nose pliers in this section.













































Follow us on social media