Camshaft Tools
Camshafts have to stay in exact relation to the crankshaft, and once a timing belt, chain or sprocket comes off, valve spring pressure will try to turn them. Camshaft tools hold the cams where they belong so timing parts can be replaced and the engine goes back together in time. This category carries cam holding tools, camshaft locking and positioning tools, cam sprocket and phaser holders, and engine-specific cam tool kits for Ford, Jeep and other makes. Auto repair technicians, dealership shops and engine rebuilders use them for timing component jobs, valve train work and camshaft replacement.
Choosing the right type
Holding and locking tools fit across the cam sprockets or into slots in the camshafts and stop them from turning while bolts are loosened and torqued. Positioning tools set a camshaft at a defined point so timing can be checked or set, often together with a crankshaft locking pin. Engine kits bundle the plates, pins and holders one engine family needs in a single case. Many of these tools fit only certain engines, so the engine code and the service procedure decide which tool is right.
Using them
Fit the tools before slackening any timing component, and follow the factory sequence for installing them and for tightening the sprocket bolts. Do not use a cam holding tool as a breaker bar against the timing chain or belt. After the job, remove the tools, turn the engine over by hand at least twice and confirm the marks line up again before starting it. Timing Tools, Valve Tools, Belt Tensioning Tools and Harmonic Balancer Tools are in the sibling categories under Engine Repair Tools.
Brands we carry
Camshaft tools here come from OTC, CTA, Lisle, Baum Tools, Mopar Essential Tools and Gedore, with more from Assenmacher and Kent-Moore.














































Follow us on social media