Punches
Pin, center, pilot and drift punches, plus letter stamps and punch sets for marking metal, driving pins and aligning holes.
Similar Categories
Featured Products - Punches
Best Selling Products - Punches
Punches and Punch Sets
Punches are struck with a hammer, or driven by air, to mark, drive or align. This section is split into Individual punches and punch Sets, and covers center punches, pin punches, pilot and drift punches, pneumatic punches, letter and number stamp sets, swaging tools and replacement punches for hole punching tools.
Types and what they do
A center punch makes a small dimple that keeps a drill bit from wandering at the start of a hole. Pin punches have a straight, flat tip that drives out roll pins, spring pins and rivets. Pilot and drift punches line up bolt holes during assembly so the bolts can go in. Letter and number stamps mark metal parts for identification, and punch-type swaging tools expand tubing ends so one tube can slip over another. Replacement punches keep hole punching tools cutting cleanly.
Choosing and using punches
Pick a pin punch slightly smaller than the pin so it does not jam in the hole, and keep the punch square to the work. Use a hammer suited to the punch size and wear eye protection. Dress mushroomed punch heads on a grinder, or replace the punch, before they start to chip. Guarded punches keep your hand away from the hammer blow, and sets keep a full range of tip sizes together so the right one is always at hand.
Sets or singles
A set is the easy way to cover common pin and tip sizes at once. Individual punches replace a broken or worn size, or add a longer or heavier punch for a job the set does not cover.
Who uses them
Auto repair technicians, fleet and diesel shops, fabricators and industrial maintenance crews use punches every day, and a basic set belongs in any home shop.
Brands we carry here include Mayhew, Kukko, Williams, Genius, Proto and GearWrench.































Follow us on social media