VisionLink 4-Channel Color Labscope - Ferret Instruments

VisionLink Lab Scope

The VisionLink has a backlit 8 "Color LCD screen capabl e of di spl ayi ng full VGA color at 640 x 480 pixels. Each of the 4 scope channels has a differential input to guard against noise and false signals.Differential leads also allow for easy measurement of vastly different signal types without damage to the engine or labscope.

EASY TO USE Simple but powerfull user interface makes this unit easy to master.
IGNITION CAPABILITY See a parade pattern on DIS, COP, and Distributor ignitions.
COMPACTFLASH A compact flash card contains operating software, waveform library, and room for storing waveforms.
CURSORS Simply press the hold button and use the cursor keys to accurately and quickly measure voltage and time.
FUTURE EXPANSION A custom RJ45 supports RS232, USB, and CANbus communications.

PROBES, PICKUPS & LEADS Spark Pickup Measures RPM, or acts as an external trigger.
Low Amps Probe Measure amps from 10 miliamps to 20 amps inductively.Use this probe to display current ramping information for injectors,ignition coils,and fuel pumps.
High Amps Probe Measure amps from .5 amps to 600 amps inductively. Use this probe to measure starter draw, alternator output, or any other high amperage draw.
Set of FerretClaws Use this unique set of wire piercing tools when trying to test hard to reach wires.
Alligator Clips & Test Prods The 92 comes with 4 ground clips and 4 color coded sense clips. Use the test prod when pin point tests are needed.
Shielded Test Leads Never again have outside noise lead you to condem a good sensor. Shielded leads and a differential input guarantee noise free measurements. Each color coded lead is 6 feet long.
Ferret 953, 10 Cylinder KV Adapter Allows the testing of up to a 10 cylinder ignition system. Auto power off function protects the internal 9V battery. Test & Measurement Specifications:

Sampling Rate: 1.6 Mhz

Bandwidth: 1 Mhz

Time Base: 50 aeS / Div. to 60 S / Div.

Volts Per Division: 50mV to 50V/Div

Max Voltage: +/- 100 Volts

Accuracy: 0.7%

Accuracy

Trigger: Any Input

Input Coupling: AC or DC

Cursors: Time and Voltage

Inputs/Outputs

BNC 1 - Differential Input

BNC 2 - Differential Input

BNC 3 - Differential Input

BNC 4 - Differential Input

RPM Pickup - Inductive

Low Amps Probe - 0 to 20A

High Amps - 0 to 600A

Battery Volts - 0 to 20 Volts

Power - 12 Volt Battery

Expansion - USB, RS232

Memory - CF Card