DBC 3-1/8" (79mm) Brake Cylinder Flex-Hone 120SC Grit

Brush Research DBC 3-1/8" (79mm) Brake Cylinder Flex-Hone 120SC Grit | DBC31812

The DBC Series Flex-Hone tool was originally developed to deglaze and finish Disc Brake cylinders but can be used anywhere a shorter, more compact tool is required. The Flex Hone tool is available in different abrasive types and grits selections.

Key Features:

• Compact design for use in tight spaces
• Available in a variety of abrasive types and grits
• Removes rust, corrosion, and glazing
• Restores cylinders to like-new condition
• Improves brake performance

Applications:

• Disc brake cylinders
• Motorcycle brake cylinders
• ATV brake cylinders
• Other small brake cylinders

Benefits:

• Improves brake performance
• Reduces brake noise
• Extends brake life
• Safer braking

How to Use:

1. Remove the brake caliper from the vehicle.
2. Disconnect the brake hose from the caliper.
3. Apply brake fluid to the inside of the brake cylinder.
4. Insert the Flex Hone tool into the brake cylinder.
5. Turn the tool clockwise to rotate the abrasive media.
6. Continue turning the tool until the brake cylinder is clean and smooth.
7. Reinstall the brake caliper and brake hose.

Warnings:

• Always wear safety glasses when using the Flex Hone tool.
• Do not use the tool on hot brake cylinders.
• Do not use the tool on damaged brake cylinders.

Technical Specifications:

• Diameter: 3-1/8" (79mm)
• Length: 5-1/2" (140mm)
• Weight: 1 lb (0.45kg)

Order Number: DBC31812