Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Shop Equipment and Supplies > Heat Guns & Torches > Mini-Ductor II Magnetic Induction Heater K

Mini-Ductor II Magnetic Induction Heater Kit

Mini-Ductor II Magnetic Induction Heater Kit

The Mini-Ductor II allows you to heat and expand frozen, rusted, or thread-lock compound nuts with out the collateral damage from a flame. Loosen seized hardware, bearings, gears, pulleys, lug nuts, in-line applications, fuel tank straps, pdr applications (paint-less dent repair), and more.

Features:

  • Grenade grip for a greasy hand technician
  • Work illuminating L.E.D. for increased vision of product application
  • Operates on 120 volts/1000 watts of power
  • Faster and Safer than a torch
  • Uses high frequency magnetic fields to heat metal and only metal, induction heat
  • Made in USA


Induction Innovations MD-700 Mini-Ductor II Magnetic Induction Heater Kit

  • Shipping Weight: 5.5lbs
  • Manufactured by: Induction Innovations
  • Toolsource #: 111172
  • Manufacturers Part #: MD-700
  • Also Known As: IDI-MD-700, IDIMD-700, IIMD-700

We have 37 in stock

Inventory available from other suppliers, prices may be different

Add to cart for details:

Frequently bought together:


Related Products

  • Mini-Ductor Coil Kit
    Mini-Ductor Coil Kit
    Manufacturers Part #: MD99-650
    Loosen seized hardware, bearings, gears, pulleys, lug nuts, inline applications, fuel tank straps, pdr applications (paintless dent repair), O2 sensors, and much more! Includes: 1(MD99-607)-1¾" I.D. preformed Coil (L 7½" x I.D. 1¾")1(MD99-608)-1½ " I.D. preformed Coil. (L 7½" x I.D. 1½")1(MD99-609)-1¼" I.D. preformed Coil. (L 7½" x I.D. 1¼"...
  • Preformed Coil for Mini-Ductor 7/8 Inch I.D.
    Preformed Coil for Mini-Ductor 7/8 Inch I.D.
    Manufacturers Part #: MD99-601
    Loosen seized hardware, bearings, gears, pulleys, lug nuts, inline applications, fuel tank straps, pdr applications (paintless dent repair), O2 sensors, and much more! Estimated 500 uses minimum. Heating a nut red hot will reduce the life of this coil. 7/8" I.D. preformed coil for heating nuts up to 3/4" Heat and expand frozen, rusted, or thread-lock compound nuts with out the collateral damage from a flame Uses high frequency magnetic...
  • Variety Coil Pack for Mini-Ductor
    Variety Coil Pack for Mini-Ductor
    Manufacturers Part #: MD99-60123
    Heat and expand frozen, rusted, or thread-lock compound nuts with out the collateral damage from a flame Uses high frequency magnetic fields to heat metal and only metal, induction heat Operates on 120 volts/1000 watts of power! Faster and Safer than a torch Variety coil pack for the Mini-Ductor replaces the original coils that come with the Mini-Ductor kit, which include: (1) MD99-601 7/8" preformed coil (1) MD99-602 U-form coil (1) MD99-6...
  • U-form Coil for Mini-Ductor
    U-form Coil for Mini-Ductor
    Manufacturers Part #: MD99-602
    Loosen seized hardware, bearings, gears, pulleys, lug nuts, inline applications, fuel tank straps, PDR applications (paintless dent repair), O2 sensors, and much more! U-form coil allows Mini-Ductor users to wind their own custom coil. This coil is 23" in length. Estimated 500 uses minimum. Heating a nut red hot will reduce the life of this coil. Changing the shape of this coil frequently will reduce its life expectancy. Heat and expand fro...
  • Mini-Pad for the Mini-Ductor
    Mini-Pad for the Mini-Ductor
    Manufacturers Part #: MD99-604
    When properly used, parts removed with the Mini Pad are also removed with the adhesive and the sheet metal left clean. Used for removing small body side moldings, pinstripe, decals, and graphics Heat releases the part while leaving no adhesive on the panel Re-use even moldings that typically curl up when ripped off No need for rubber wheels and solvents anymore! Induction Innovations MD99-604 Mini-Pad for the Mini-Ductor ...
  • Preformed Coil for Mini-Ductor 1-1/4 Inch I.D.
    Preformed Coil for Mini-Ductor 1-1/4 Inch I.D.
    Manufacturers Part #: MD99-609
    Estimated 500 uses minimum. Heating a nut red hot will reduce the life of this coil. 1-1/4" I.D. preformed coil heats nuts up to 1-1/8" Heat and expand frozen, rusted, or thread-lock compound nuts with out the collateral damage from a flame Uses high frequency magnetic fields to heat metal and only metal, induction heat Operates on 120 volts/1000 watts of power! Faster and safer than a torch Induction Innovations MD99-609 1-1/4" I.D. P...

Customers Also Purchased:

  • Mini-Ductor Coil Kit
    Mini-Ductor Coil Kit
    Manufacturers Part #: MD99-650
    Loosen seized hardware, bearings, gears, pulleys, lug nuts, inline applications, fuel tank straps, pdr applications (paintless dent repair), O2 sensors, and much more! Includes: 1(MD99-607)-1¾" I.D. preformed Coil (L 7½" x I.D. 1¾")1(MD99-608)-1½ " I.D. preformed Coil. (L 7½" x I.D. 1½")1(MD99-609)-1¼" I.D. preformed Coil. (L 7½" x I.D. 1¼"...
  • MINI-DUCTOR LONG COIL KIT 13"
    MINI-DUCTOR LONG COIL KIT 13"
    Manufacturers Part #: MD99-675
    Contents: MD99-675: 2 ea. MD99-622, MD99-621, 1 ea. MD99-620, MD99-625, MD99-624, MD99-623 w/storage tube (20.5L x 2.75Dia.)(10.6 oz.). Selling description: For use with the Mini-Ductor II. Best for those deeper, hard to reach places under the hood....
  • Mini-Pad for the Mini-Ductor
    Mini-Pad for the Mini-Ductor
    Manufacturers Part #: MD99-604
    When properly used, parts removed with the Mini Pad are also removed with the adhesive and the sheet metal left clean. Used for removing small body side moldings, pinstripe, decals, and graphics Heat releases the part while leaving no adhesive on the panel Re-use even moldings that typically curl up when ripped off No need for rubber wheels and solvents anymore! Induction Innovations MD99-604 Mini-Pad for the Mini-Ductor ...
  • 3/8 In Drive SuperKrome Fractional Flare Nut Crowfoot Wrench Set
    3/8 In Drive SuperKrome Fractional Flare Nut Crowfoot Wrench Set
    Manufacturers Part #: 4508
    Made in the U.S.A., featuring quality workmanship and value. High polish SuperKrome® plating results in a jewelry-like finish, providing long life and maximum corrosion resistance. Flare nut crowfoot wrenches are designed for use on soft fittings such as brass and aluminum. 10 Piece Set Includes: 3/8" Wrench 7/16" Wrench 1/2" Wrench 9/16" Wrench 5/8" Wrench 11/16" Wrench 3/4" Wrench 13/16" Wrench 7/8" Wrench 1" Wrenc...
  • COP Quick Probe VS
    COP Quick Probe VS
    Manufacturers Part #: 76562
    The fastest way to verify the firing of a Coil Over Plug ignition coil and spark plug. It eliminates the need for back-probing coil wires and disassembly to test at the coil connector or spark plug. Variable sensitivity for greater diagnostic accuracy and expanded application coverage. Simply press the 7" long antenna probe against the ignition coil and use the thumb-wheel to adjust the sensitivity until the LEDs begin flashing. Each time the...
  • 13 Watt Fluorescent Work Bounce Lite - 25 Ft Cord
    13 Watt Fluorescent Work Bounce Lite - 25 Ft Cord
    Manufacturers Part #: 12006
    Your Price: $43.85
    This is a unique light, the name says it all. If you drop it no worries with this light, it will bounce right back.  There's no glass to pick up and no bulb to replace.  Be sure to have this light in your shop!  Made in the USA. Bounces instead of breaking Fully enclosed safety switch Patented Bounce-Bulb for superior impact protection Superior cord life 18/2 SJTOW 11006-17 replacement light25 ft cord.13 watt. Central Tools 12006 B...

Customers Also Shopped For:

  • U-form Coil for Mini-Ductor
    U-form Coil for Mini-Ductor
    Manufacturers Part #: MD99-602
    Loosen seized hardware, bearings, gears, pulleys, lug nuts, inline applications, fuel tank straps, PDR applications (paintless dent repair), O2 sensors, and much more! U-form coil allows Mini-Ductor users to wind their own custom coil. This coil is 23" in length. Estimated 500 uses minimum. Heating a nut red hot will reduce the life of this coil. Changing the shape of this coil frequently will reduce its life expectancy. Heat and expand fro...
  • 7-Pc SuperKrome(R) Short Pattern Fractional Combo Wrench Set
    7-Pc SuperKrome(R) Short Pattern Fractional Combo Wrench Set
    Manufacturers Part #: 86237
    7-Piece SuperKrome(R) Fractional Short Pattern Combination Wrench Set (Stubby) Short pattern design enables greater access in confined spaces.The patented SureGrip(R) hex design drives the side of the fastener, not the corner.High Polish SuperKrome(R) plating results in a jewelry-like finish, providing long life and maximum corrosion resistance.Both wrench ends are angled for greater access.The box end design features a 15? offset head, which pr...
  • 3/8 In Drive SuperKrome Fractional Flare Nut Crowfoot Wrench Set
    3/8 In Drive SuperKrome Fractional Flare Nut Crowfoot Wrench Set
    Manufacturers Part #: 4508
    Made in the U.S.A., featuring quality workmanship and value. High polish SuperKrome® plating results in a jewelry-like finish, providing long life and maximum corrosion resistance. Flare nut crowfoot wrenches are designed for use on soft fittings such as brass and aluminum. 10 Piece Set Includes: 3/8" Wrench 7/16" Wrench 1/2" Wrench 9/16" Wrench 5/8" Wrench 11/16" Wrench 3/4" Wrench 13/16" Wrench 7/8" Wrench 1" Wrenc...
  • Universal Outside Thread Chaser
    Universal Outside Thread Chaser
    Manufacturers Part #: 7402
    Your Price: $88.36
    Precision dies restore threads to their original condition to make reassembly of matching parts faster & easier.Eliminates the need for expensive thread cutting equipment.Tighten the tool slightly on the good threads, then back off over the damaged thread area to restore the threads.The die cast alloy V-pad will not damage the threads.V-pads & dies can be replaced when worn out.Capacity: from 1 1/4" to 5" O.D.Complete w/ 6 dies: threads per inch...
  • Universal Sleeve Puller for Wet Type Sleeves
    Universal Sleeve Puller for Wet Type Sleeves
    Manufacturers Part #: 1205
    Your Price: $597.83Includes Free Shipping
    Universal Sleeve Puller for Wet Type Sleeves With 5 lb. slide hammer assembly.This tool does the job faster than ordinary sleeve pullers because setup time is slashed.Cone adjustment positions the puller jaws quickly, locking bar is tightened.To aid in breaking "frozen" sleeves loose, adjustable bridge is positioned on the cylinder block & the bearing mounted forcing nut is tightened.Bridge is removed & slide hammer assembly is attached.With a f...
  • Combination Spoon
    Combination Spoon
    Manufacturers Part #: 1050
    Your Price: $53.49
    General purpose fender spoon. Used as dolly behind brackets, inner panels and similar places. Handles offset to give balance when dinging and for long reach. Has high crown working surface. Face 1-3/4" x 5-1/2"Handle 1" octagon 4-3/4" longWeight 3.0 lbs. Martin Sprocket & Gear 1050 Combination Spoon ...

Current Reviews: 0