Flywheel Turner

Hold or turn flywheels and flexplates on most vehicles.
Use this special wrench to turn the flywheel and rotate the engine.
Also holds the flywheel or flexplate when torqueing the flywheel or harmonic balancer bolts.
Folds for easy storage.
Shipping wt. 1 lb. 4 oz.

Lisle 23800 Flywheel Turner

Shipping Weight: 1.15lbs
Manufactured by: Lisle
Toolsource #: 91752
Manufacturers Part #: 23800
Also Known As: LI23800, LIS-23800, LIS23800, LS23800

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different

Write Review

$24.59

Frequently bought together:

Electrical Connector Separator

Add this item to your cart and save $2.00 when purchased with the product above.
Discount applied at checkout.

Customers Also Purchased:

Electrical Connector Separator

Manufacturers Part #: 13120
Your Price: $7.98
Engage the tool tip behind the connector clip. Push or pull to disconnect. The tool is double-ended to fit different access angles.Works on Weather Pack and other automotive electrical connectors.Quickly disconnects electrical connectors without damage. Lisle 13120 Electrical Connector Separator ...
Add to Cart Details
Relay Puller Pliers

Manufacturers Part #: 46950
Your Price: $14.03
Pliers for removing electrical relays on most domestic and import vehicles.Offset handle and thin tips allow access to relays in confined areas.Specially designed tips are angled to fit slots or edge of relay cover. This allows relay to pop free from socket with less chance of damaging the relay.Also works on many heavy-duty and industrial applications.Shipping weight: 5 oz. Lisle 46950 Relay Puller Pliers ...
Add to Cart Details
Bent End Pry Bar Set w/ Handles - 3-Pc

Manufacturers Part #: 6093
3 Piece Pry Bar Set in A Plastic Case.Includes 12", 17", and 25" Bent Tip Pry BarsPlastic Handles...
Add to Cart Details
Engine Calibration & Set Up Kit

Manufacturers Part #: 7891
Your Price: $129.99Includes Free Shipping
The Engine Calibration & Set-up Kit gives you innovative tools that help eliminate mistakes when setting up mechanical engine timing sequences, timing chains, timing belts, balance shafts and belts, distributor installations and general engine set-up. Kit includes: Standard 6" (14mm) and Extended 10.75" (14mm) TDC Indicators, Compression Gauge Extension, Compression Whistle AlertT, Crank Stopper, 18mm & 12mm Spark Plug Hole Adapters, extra nippl...
Add to Cart Details
Harmonic Balancer Puller for GM

Manufacturers Part #: 45300
Your Price: $31.37
Removing the harmonic balancer on late model 3300 and 3800 V6 GMs requires pulling hardware much different than conventional pullers. The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor.Order the 45350 Retrofit Kit to use with your Lisle 45500 Harmonic Balancer Puller. Lisle 45300 Harmonic Balancer Puller for GM 3300 And 3800 V6 Cylinder Engines ...
Add to Cart Details
GearWrench Drive Adapter Set - 3 Pc - Metric

Manufacturers Part #: 9230
Your Price: $20.25
Turn Your GearWrench Into a Ratchet With These Specially Designed Adapters Includes: 9207 - 1/4" Dr. x 10mm, 9208 - 3/8" Dr. x 13mm, 9209 - 1/2" Dr. x 19mm. KD Tools 9230 3-Pc Metric GearWrench Drive Adapter Set ...
Add to Cart Details

Customers Also Shopped For:

1/4 In Drive 12 Pt Metric Standard Socket Set - 10 Piece

Manufacturers Part #: 1340
10 piece set is made in the U.S.A., featuring SK's high polish SuperKrome(R) finish, which protects the tools from the harsh working environments found in today's workplace. Provides long life and maximum corrosion resistance. All sockets feature SK's SureGrip(R) hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is ...
Add to Cart Details
Wrinkle Band Ring Compressor - 3 to 5 Inch Range

Manufacturers Part #: 21700
Your Price: $14.39
Low Friction - Wrinkle band cuts friction in half.Rings slide in easily.Wrinkle band can`t slip down into cylinder.Cam Operated - Set adjustment screw just once for entire set of pistons.Insert a full set of pistons in half the time, with half the work!Shipping weight 6 oz. Lisle Corporation 21700 Wrinkle Band Ring Compressor - 3" to 5" Range ...
Add to Cart Details
Hex Key Set w/ Pouch - 25 Piece - SAE & Metric

Manufacturers Part #: 71425
Your Price: $8.81
Hex Key Set w/ Pouch - 25 Piece - SAE & Metric Features: Comes in a handy roll pouch.Includes 1/16" through 3/8" fractional hex keys.Includes 1.5mm through 10mm metric hex keys. ...
Add to Cart Details
Metric Shallow Socket Set - 1/2 In Drive - 14 Piece

Manufacturers Part #: 28100
Your Price: $62.03
Metric Shallow Socket Set - 1/2" Drive - 14 Piece Features: 1/2" drive.6 point shallow sockets.Set includes 14 sockets, sizes 15mm to 28mm.Chrome vanadium steel.Heat treated.Includes a socket rail. ...
Add to Cart Details
Pipe Thread Kit - 1/8-27

Manufacturers Part #: 5407-2
Your Price: $311.85Includes Free Shipping
Please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Tap Part No. - 328-2Installation Tool Part No. - 3371-2Insert Package Park No. - R327-2Drill Size - 3/8"12 Inserts Per Kit Heli Coil 5407-2 Pipe Thread Kit - Thread Size 1/8-27 ...
Add to Cart Details
Cut Thread Fractional Taper Tap -1/4In -20 NC

Manufacturers Part #: 1320
Your Price: $2.21
High carbon steel cut thread fractional tap - 1/4"- 20 NC - taper.Designed and manufactured to handle the most difficult hand tapping applications.Taper, plug and bottoming styles are available.Highly polished flutes - aid in chip removal.Taps produce a class 2B thread.No. of flutes - 4.Made in USA. Irwin Hanson 1320 1/4" -20 NC Cut Thread Fractional Taper Tap ...
Add to Cart Details

Current Reviews: 0

Automotive Specialty Tools > Engine Repair > Harmonic Balancer Tools > Flywheel Turn

Flywheel Turner

Frequently bought together:

Customers Also Purchased:

Customers Also Shopped For: