Your cart is empty.
-
Adapter for 303-D043 Engine Lifting Attachment 6.0L Diesel
Manufacturers Part #: 303-D043-02
Your Price: $81.93Applications: 6.0L Diesel Used with 303-D043 Engine Lifting Attachment Image is representative of product, but may vary from actual item. This item may not be in stock; please email service@toolsource.com for lead time. OTC 303-D043-02 Adapter for 303-D043 ... -
Cross Bracket Assembly
Manufacturers Part #: J-284671-A
Your Price: $65.43Kent-Moore Tools J-284671-A Cross Bracket Assembly ... -
Driveline Assembly Support Strap Corvette XLR
Manufacturers Part #: J-42203
Your Price: $633.94Includes Free ShippingApplications: Corvette Previously essential for Corvette, J-42203 is required for the XLR when the engine is removed from the vehicle. The front torque tube must be supported to keep the entire differential, transmission, and torque tube asembly from becoming unstable and tilting down, which could cause damage to the rear mount and crossmember assembly. Non-stock item, back order status; please email service@toolsource.com for cost and lead time... -
Engine Lift Bracket
Manufacturers Part #: J-44220-A
Your Price: $184.47Includes Free ShippingNon-stock item; please email service@toolsource.com for cost and lead time. Kent-Moore J-44220-A Engine Lift Bracket (Incl. J-44220-UPD)... -
Engine Lift Bracket H2
Manufacturers Part #: J-41798
Your Price: $426.29Includes Free ShippingApplications: H2 F, Y CAR For appearance reasons, the brackets used to install the engine in the chassis of the 1998 F-car are removed at the factory. To avoid component damage when lifting the engine, special shaped brackets are required. Two brackets are attached to the cylinder heads with bolts included with the tool. One is attached to the front left; the other at the right rear of the engine. A jib crane and chains are hooked into the brack... -
Engine Lift Hooks
Manufacturers Part #: J-41427
Your Price: $555.28Includes Free ShippingIncludes front and rear lifting brackets. All 1996 and later truck gas engines will utilize a new two piece aluminum/plastic intake manifold. With this new design and the elimination of the factor lifthooks, J-41427 is required to properly lift the engine from the vehicle.J-41427 consists of two lift brackets which bolt to the front and rear corners of the intake manifold. Kent-Moore J-41427 Engine Lift Hooks ... -
Engine Lift Studs
Manufacturers Part #: 8400
Your Price: $106.95Includes Free ShippingThese special studs are used with the 8347 Engine Lifting Fixture to prevent damage while removing or installing 4.7 Liter Engines in AN & DN vehicles.2003 thru current.Non-stock item. Manufacturer drop-ship. Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time. SPX Miller Special Tools 8400 Engine Lift Studs ... -
Engine Lifting Attachment Ford D83T-6000-B 7.3L Diesel
Manufacturers Part #: 303-D043
Your Price: $936.69Includes Free ShippingSame as Ford D83T-6000-B For 7.3L diesel.For 6.0L diesel you must order 303-D043-01 and 303-D043-02Product Weight: 29 Lbs Image is representative of product, but may vary from actual item. This item may not be in stock; please email service@toolsource.com for lead time. OTC 303-D043 Engine Lifting Attachment ... -
Engine Lifting Fixture
Manufacturers Part #: 8984C
Your Price: $321.75Includes Free ShippingUse this special fixture to remove or install the 5.7 Liter Hemi Engine in DR, LX and WK vehicles. NOTE: Supersedes 8984, 8984C. Current Usage*: 2006 (DR, HB, LX, WK, XK) - Systems (9 - Engine, 5.7L, 9 - Engine, 6.1L) 2007 (DR, HB, HG, LX, WK, XK) - Systems (9 - Engine, 5.7L, 9 - Engine, 6.1L) 2008 (DR, HB, HG, LC, LX, WK, XK) - Systems (9 - Engine, 5.7L, 9 - Engine, 6.1L) 2009 (DH, DS, HB, HG, LC, LX, WK, XK) - Systems (9 - Engine, 5.7L, 9 - Eng...