What is a dial indicator used for in automotive work?

Dial indicators are precision measuring instruments used to accurately determine small linear distances and variations. In automotive applications, they are essential for tasks like measuring brake rotor runout, checking valve train component wear, diagnosing drivetrain backlash, and ensuring precise alignment during engine building. They provide a much more accurate reading than can be achieved with the naked eye or standard measuring tools. For example, the Central Tools Gage Disc Rotor/Ball Joint Set uses a dial indicator to precisely measure disc rotor run-out.

What are the key features to consider when choosing a dial indicator?

Several factors influence dial indicator selection. Range dictates the maximum distance the indicator can measure. Graduations determine the level of precision, with finer graduations (e.g., 0.001") offering greater accuracy. The type of back (e.g., lug back, magnetic base) determines how the indicator is mounted. Also, consider the reading style (continuous or balanced) based on your preference. For instance, the Central Tools Sleeve Height & Counterbore Gage includes a dial indicator with a 1.00" range and 0.001" graduations, making it suitable for precise engine measurements.

What is the difference between a continuous and a balanced dial indicator?

The primary difference lies in how the dial is numbered. A continuous dial indicator features a single set of numbers that increase sequentially around the dial face. A balanced dial indicator has numbers that increase from zero in both directions. Balanced dial indicators are particularly useful when measuring deviations above and below a specific reference point. Many dial indicators, like the Central Tools Dial Indicator 0-1 .001 Graduation, are available in both continuous and balanced reading styles to suit different applications.

What is runout, and how do I measure it with a dial indicator?

Runout refers to the amount of wobble or deviation a rotating part exhibits. To measure runout, securely mount the dial indicator so the contact point touches the rotating surface. As the part rotates, observe the total indicator reading (TIR), which is the difference between the maximum and minimum readings on the dial. This measurement indicates the total runout. Make sure the indicator's contact point is perpendicular to the surface being measured for accurate results. The Central Tools Gage Disc Rotor/Ball Joint Set is specifically designed for measuring runout on brake rotors and ball joints.

What are common types of dial indicator contact points, and when should I use them?

Dial indicator contact points come in various shapes and materials to suit different applications. Standard ball-shaped points are versatile for general use. Needle points are ideal for reaching into tight spaces or measuring narrow grooves. Disc-shaped points are useful for measuring flat surfaces or checking alignment. Extended contact points, like the Central Tools Extension Contact 1.000 Shaft, provide additional reach for special applications. Always select a contact point that provides stable and accurate contact with the surface being measured.

How do I choose the correct mounting base for my dial indicator?

The mounting base secures the dial indicator in position, so stability is key. Magnetic bases offer strong adhesion to ferrous metal surfaces, making them convenient for many automotive tasks. Lug backs provide a fixed mounting point using screws or bolts. Some indicators have a shank for mounting in a collet or holder. Consider the available mounting surfaces and the required stability when selecting a base. Ensure the base allows for fine adjustments to properly position the indicator.

What does 'resolution' mean in the context of dial indicators?

In dial indicators, resolution refers to the smallest increment of measurement that the indicator can display, typically expressed in thousandths of an inch (0.001") or millimeters. A higher resolution indicator provides more precise readings. For tasks requiring very fine measurements, such as checking engine clearances or measuring minute variations in surface flatness, an indicator with a higher resolution is essential. Consider the required level of accuracy for your application when selecting a dial indicator's resolution.

Search

Manufacturers [more]

Central Tools | 4201 | Contact Point - Standard - .100

Name: Contact Point - Standard - .100
Brand: Central Tools
SKU: 76059
Price: 7.7 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

"A" = .100

3/16" base

AGD standard 4-48 thread.

Hardened steel.

Polished tip with radius end.

Central Tools 4201 Standard Contact Point

Other products
Central Tools Homepage
Model: 76059
Shipping Weight: 0.1lbs
Manufacturers Part #: 4201
Manufactured by: Central Tools
Also Known As: CEN4201, CE4201, CEN-4201

Only 1 left in stock - order soon

$7.70

Add to Cart:

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

Write Review

This product was added to our catalog on Friday 14 January, 2000.

Automatic Discount

Special Deal: Purchase the item above and the one below to save!

Old Price:

$19.5500

- $1.93

Your Price:

$17.63

Search

Manufacturers [more]

Categories

Central Tools | 4201 | Contact Point - Standard - .100

$7.70

Automatic Discount

Special Deal: Purchase the item above and the one below to save!

Customers who bought this product also purchased...

Customers Also Shopped For

Customer Service

Popular Manufacturers

Popular Categories