Dial Calipers, Vernier Calipers and Drum Gauges
A dial caliper measures outside, inside and depth dimensions with sliding jaws and shows the reading on a dial, while a vernier caliper uses an engraved vernier scale instead. This category carries dial calipers in common ranges such as 0 to 6 in., vernier calipers, and brake drum gauges for checking drum diameter against the discard size cast into the drum.
How a caliper is used
The outside jaws close on a shaft or part thickness, the inside jaws open in a bore, and the depth rod slides out of the end of the beam for steps and holes. Zero the caliper with the jaws closed and clean, close the jaws squarely on the part without forcing them, and read the beam scale plus the dial. Keep the jaws free of grit and store the tool in its case so the reading stays true.
Choosing between types
Dial calipers are quick to read and easy to learn. Vernier calipers have no gears or dial to damage, which suits rough shop use. Drum gauges are made for one job and read drum size directly. For finer work, micrometers go a step further in resolution.
Auto and brake shops, machine shops, engine builders and quality inspectors use these tools daily. Brands we carry here include Fowler, Central Tools, General Tools, Performance Tool and Cal-Van. Micrometers, dial indicators and cylinder bore gauges are in the other measurement categories.























































Follow us on social media