Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Paint & Body > Pullers > Dent Pullers > Portable Dent Puller - 230 Vo

Portable Dent Puller - 230 Volt

Portable Dent Puller - 230 Volt

UPS Ground Only

  • Primary voltage: 208/230 single phase 60/50 Hz
  • Line Fuse: 30 Amp
  • Size: 11-1/2"H X 15"W x 16-3/4"L
  • Power Input Cable: 25`, No. 12/3 wire
  • Cable Assembly Length: 7` ground, 7` power
  • Maximum Welding Capacity: 20 gauge
  • Autobody steel
  • A-2000 stand sold separately.
  • Weight: 64 lbs. (29 kg)
Note: This item is normally available for same day shipment if order is received prior to 2 PM Eastern Time. However, this item is not eligible for Next Day or 2nd Day Air shipping at banded shipping rates. Please contact us for expedited shipping quotation.

Lenco LP2000 230 Volt Portable Dent Puller

  • Shipping Weight: 64lbs
  • Manufactured by: Lenco
  • Toolsource #: 93257
  • Manufacturers Part #: LP2000
  • Also Known As: LC20720, LNXLP2000

We have 10 in stock

Inventory available from other suppliers, prices may be different

$792.80

Frequently bought together:


Related Products

  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
  • Midi-Weight Slide Hammer Dent Puller
    Midi-Weight Slide Hammer Dent Puller
    Manufacturers Part #: 81200
    Your Price: $44.84
    Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb...
  • Dent Puller & Slide Hammer
    Dent Puller & Slide Hammer
    Manufacturers Part #: 81400
    Your Price: $29.13
    The largest selling and most economical body shop dent puller in the industry. 3 lb. slide weight is mounted on 1/2" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technician`s hands and provides 100 percent grip. Broached hex in nose cone locks pulling screw in place - ends breakage. Supplied with two hardened pulling screws and "L" puller hook fabricated of aircraft quality steel. Nose cone and sh...
  • Junior Slugger Slide Hammer Dent Puller
    Junior Slugger Slide Hammer Dent Puller
    Manufacturers Part #: 81500
    Your Price: $33.28
    The finest shop engineered heavy duty slide hammer with 3 lb. slide weight. Features a soft vinyl "Hang-It" handle grip for easy storage and shock cushioning. Special wide aircraft steel body hook is used to pull curls and creases in quarter, rocker, back and door panels. "L" hook, broached nose cone, two jam nuts and two hardened pulling screws are supplied. Designed for the professional body technician - a LIFETIME tool. Total weigh...
  • The Tapper Slide Hammer Dent Puller
    The Tapper Slide Hammer Dent Puller
    Manufacturers Part #: 81600
    Your Price: $17.43
    The ideal body panel puller for the do-it-yourselfer. The 2 lb. weight slides on plated shaft. Spade handle makes it easy to rotate tool and turn puller screw into body panel. Broached nose cone prevents puller screw from turning. Nose cone and shaft threads are 3/8"-24. S & G Tool Aid 81600 The Tapper 2 Lb. Dent Puller ...
  • Rubber Suction Cup Dent Puller - 6 In
    Rubber Suction Cup Dent Puller - 6 In
    Manufacturers Part #: 81810
    Your Price: $12.92
    Use to pull out sheet metal panel dents on doors, fenders and hoods. Steel handle reinforced steel support plate allow for maximum pull. Release suction easily by lifting "lipped" edge. S & G Tool Aid 81810 6 Inch Rubber Suction Cup ...
  • Body and Fender Dent Puller
    Body and Fender Dent Puller
    Manufacturers Part #: 898A
    Your Price: $39.85
    Often, the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out. Puller is 17" long with Pyralin handle grip.Replaceable self-tapping screw.Instructions included.No. 11200 - Replacement screw. OTC 898A Body ...
  • Dent Puller Attachment for Slide Hammer
    Dent Puller Attachment for Slide Hammer
    Manufacturers Part #: 205377
    Your Price: $15.03
    Use as an attachment to slide hammer p/n 1179. OTC 205377 Dent Puller Attachment for Slide Hammer ...
  • Portable Dent Puller 120 Volt
    Portable Dent Puller 120 Volt
    Manufacturers Part #: LP2000/120
    Your Price: $792.80Includes Free Shipping
    Lenco dent pulling systems allow for any type of pull in any situation. Systems have their own specially designed transformers. Primary voltage: 120 volts 50/60 HzLine Fuse: 30 AmpSize: 11-1/2"H X 15"W x 16-3/4"LPower Input Cable: 25 ft, No. 12/3 wire7 ft welding & 7 ft ground cable leadsMaximum Welding Capacity: 20 gaugeAutobody steel A-2000 stand sold separately. Shipping Weight: 64 lbs. (29 kg) UPS Ground Only Lenco LP-2000/120 Portable Dent ...

Customers Also Purchased:

Customers Also Shopped For:


Current Reviews: 0