Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Paint & Body > Pullers > Dent Pullers > The Shark II - 110v Dent Removal Syst

The Shark II - 110v Dent Removal System

The Shark II - 110v Dent Removal System
Replace your stud welder with our 110 volt version of The Maxi 2. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It's like having sticky fingers and being able to pull dent with your hand.
  • Pin/ washer tip, Wiggle wire tip, 1 pound wiggle wire, shrink tip, 3 finger claw, slide hammer rod & weight, short pull rod, leverage puller and ground magnet included.
  • Made in China.
  • 1 year warranty.
Note: This item is normally available for same day shipment if order is received prior to 2 PM Eastern Time. However, this item is not eligible for Next Day or 2nd Day Air shipping at banded shipping rates. Please contact us for expedited shipping quotation.

Dent Fix Equipment DF-595II The Shark II - 110v Dent Removal System DF595II
  • Shipping Weight: 54lbs
  • Manufactured by: Dent Fix
  • Toolsource #: 133447
  • Manufacturers Part #: DF-595II
  • Also Known As: DENDF595-II, DF595II, DNT-595II, DTF-DF-595II

Only 9 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $1,150.00Add to cart for details:

Related Products

  • 8 mm Cobalt Spot Weld Drill Bit
    8 mm Cobalt Spot Weld Drill Bit
    Manufacturers Part #: DF-1780
    Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Dent Fix Equipment DF-1780 8 mm Cobalt Spot Weld Drill Bit DF1780...
  • Long Telescoping Measuring Tram Gauge
    Long Telescoping Measuring Tram Gauge
    Manufacturers Part #: DF-3TC5A
    Telescopic measuring trams are great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench measuring system or mount the car on a rack. Extend out only as much tram as is needed. No need to add up sections, the internal tape reads out through a display window. Extruded aluminum sections make this tram light weight yet rigid when fully extended. DF-3TC5 measures 41.5" to 15' Dent Fix Equipment DF-3TC...
  • Punch and Flange Plier 5/16"
    Punch and Flange Plier 5/16"
    Manufacturers Part #: DF-516PF
    This plier combines a 5/16th hole punch with a flanging tool. The swiveling head allows you to change from one function to the other with the flip of a wrist. Manufactured in Denmark, this plier is built to last. Dent Fix Equipment DF-516PF Punch and Flange Plier 5/16" DF516PF...
  • Vehicle Surge Protector
    Vehicle Surge Protector
    Manufacturers Part #: DF-601A
    Perfect for prevention of over-voltage damage Acting like a sponge to soak up electrical surges, this unit protects sensitive electronic components when mig and spot welding on a vehicle. An Absolute must when jump starting. No need to disconnect the battery for protection. An LED indicates that the device is working and correctly connected. Lifetime warranty. How our Surge Protector Works. The DF-601 surge protector passes the electrical curren...
  • Right Angle Undercoat, Seam Seal, Rust and Decal Remover
    Right Angle Undercoat, Seam Seal, Rust and Decal Remover
    Manufacturers Part #: DF-701
    Compact design lets this tool work best in tight areas, like wheel wells. Remove thick sealer and undercoating with ease. Strips right down to bare metal with the 3 MBX Course brushes. The included decal eraser makes quick work of large stickers and decals. Eliminate labor intensive work with this economical tool. Dent Fix Equipment DF-701 Right Angle Undercoat, Seam Seal, Rust and Decal Remover DF701...
  • Coarse Wire Brush
    Coarse Wire Brush
    Manufacturers Part #: DF-702C
    These brushes ride in an aluminum housing that permits the brushes to flex. This movement allows the brushes to compress in tight corners and contour themselves over lipped edges and curved corners. All brushes are compatible with the DF-701 and DF-700 Eliminator kit. Dent Fix Equipment DF-702C Coarse Wire Brush DF702C...

Customers Also Purchased:

Customers Also Shopped For:

  • *100/BX* 5" SPREADERS
    *100/BX* 5" SPREADERS
    Manufacturers Part #: 51005
    Your Price: $40.03
    E-Z Spreaders have an embossed logo and are available in 50 or 100-packs. 50-packs come as a dispenser pack that can be hung on a shop wall. 100-packs are packaged as a convenient counter display. New! E-Z MIX is expanding our line of body filler and glaze spreaders with the addition of our 2-inch spreader (51002). The 2-inch spreader is ideal for smaller work areas like bumpers. The existing workforce will sometimes cut a 4-inch spreader in half...
  • Wheel Bearing Puller .750 I.D.
    Wheel Bearing Puller .750 I.D.
    Manufacturers Part #: 1042-2
    Your Price: $34.16
    .750 I.D. Use to remove and install new style sealed wheel bearings without damaging the wheel Image is representative only, showing entire kit (Jim's part number 939) which must be purchased separately. JIMS USA 1042-2 Wheel Bearing Puller...
  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
  • 50:1 Air-Operated Portable Grease Pump Unit 120 Lb (16 Gal) w Ca
    50:1 Air-Operated Portable Grease Pump Unit 120 Lb (16 Gal) w Ca
    Manufacturers Part #: 8622A
    Your Price: $636.91Includes Free Shipping
    For Use With 16-Gallon (120 Lbs.) Containters 50:1 pump 70-100 PSI operating pressure Pumps up to 1.76 lbs. per minute 82 dB noise level 13' delivery hose 15.10" drum cover 14-1/2" follower plate Control valve and 'Z' swivel Comes with 4 wheel cart Ship weight 38 lbs. (Drum not included) American Forge & Foundry AFF 8622A 50:1 Air-Operated Portable Grease Unit 120 Lb (16 Gallon) ...
  • 7 Inch Straight Jaw Locking Pliers VGP7R
    7 Inch Straight Jaw Locking Pliers VGP7R
    Manufacturers Part #: 7R
    Your Price: $13.53
    Jaw adjustment - 0 - 1 1/8"/0 - 29mm. The World`s most versatile tool - used for turning, cutting, tightening, clamping & twisting. Tooth design that holds - Hardened tooth design grips from any angle. Built to last a life time - high-grade alloy steels heat treated for maximum toughness and durability. Adjusting screw gives exacting pressure - Turn Adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure....
  • 7 Pcs Ball Joint Service Tool Set
    7 Pcs Ball Joint Service Tool Set
    Manufacturers Part #: AT-7207
    Your Price: $124.26Includes Free Shipping
    7 Pcs Ball Joint Service Tool Set  AT-7207 Description Forcing screw,C-frame,Receiving tube(3 pcs), Removing adapter,Installing adapter. Blow Case Genius Tool AT-7207 7 Pcs Ball Joint Service Tool Set   ...

Current Reviews: 0