Dead Blow Hammers
A dead blow hammer has a head partly filled with loose shot that shifts forward on impact, so the blow lands solidly and the hammer does not bounce back. That makes it the hammer to reach for when seating bearings and races, tapping parts into alignment, freeing stuck components and knocking out pins without damaging finished surfaces. Auto repair technicians, fleet and diesel shops, tire shops, machine shops and industrial maintenance crews all keep one or two on hand.
How a dead blow works
With an ordinary hammer, part of the energy goes into rebound, and the hammer jumps back toward the user. In a dead blow, the shot inside the head arrives a split second after the face hits, adding to the blow and soaking up the bounce. More of the force goes into the part and less into the wrist, with fewer glancing strikes that mark a surface.
Choosing weight and face
The category covers several head weights and handle lengths, from light one pound hammers for close work around trim and small assemblies to heavier hammers, such as four pound models, for driveline, suspension and equipment jobs. Most faces are a non-marring material, and some models have replaceable faces, including brass faces, so a worn face can be changed instead of the whole hammer. Longer handles give more swing for heavy blows, while shorter ones give control in tight spaces.
Using them
Strike square with the face, not the edge, and keep the face clean so grit does not mark the part. A dead blow is not the tool for driving chisels or setting rivets; use a ball peen or sledge hammer for that kind of steel-on-steel work. Check the head for cracks and splits now and then, since a torn shell lets the shot leak out.
Brands include Williams, Titan, Trusty-Cook, GearWrench, Wilton and Vaughan. Soft face, brass, ball peen and sledge hammers have their own categories under Hammers.




















































Follow us on social media