Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Cylinder Tools > Crankshaft > Handle for J-42067 Rear Main Seal Install

Handle for J-42067 Rear Main Seal Installer

Handle for J-42067 Rear Main Seal Installer
Kent-Moore J-28467-34 Handle for J-42067 Rear Main Seal Installer
  • Shipping Weight: 0.3lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 129990
  • Manufacturers Part #: J-28467-34
  • Also Known As: KMJ28467-34

Only 2 left in stock - order soon

$31.88

Customers Also Shopped For:

  • Rear Seal Installer
    Rear Seal Installer
    Manufacturers Part #: J-42067-A
    Your Price: $218.97Includes Free Shipping
    Rear Seal Installer J-42067-A Applications: Malibu and ATS   The rear crankshaft seal is a single-piece seal, which must be installed squarely, and flush to the rear of the block. The seal is placed onto the pilot of J-42067-A, and the assembly is attached to the rear face of the crankshaft, and secured. The handle of J-42067-A is tightened against the installer cover, until the seal is fully seated. Unapproved methods will result in less t...
  • Compressor Screw and Frame Tool
    Compressor Screw and Frame Tool
    Manufacturers Part #: J-23456
    Your Price: $440.45Includes Free Shipping
    Compressor Screw and Frame J-23456 Tool Number: J-23456 Tool Name: COMPRESSOR SCREW AND FRAME Applications: VAC BSTR;AT&ATA Kent-Moore KM J-23456 Compressor Screw and Frame ...
  • 10" Adjustable Black Wrench
    10" Adjustable Black Wrench
    Manufacturers Part #: 810NW
    Your Price: $19.42
    10" Adjustable Black Wrench  810NW ? Longer jaws grip better, avoiding slippage or nut round off ? Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters ? Greater jaw capacity supports larger nuts and bolts ? Thinner jaws for greater access in tight spaces ? Precise jaw design grips tight the first time, every time ? 4 thread knurl & non-protruding jaws provide greater capacity; minimal head ...
  • 38mm Combination Metric Wrench 12 Point
    38mm Combination Metric Wrench 12 Point
    Manufacturers Part #: 1071-38
    Your Price: $18.95
    38mm Combination Metric Wrench 12 Point  1071-38 ? Jumbo type ? 15° open ended angle ? 15° box end ? Satin finish, chrome plated ? ANSI B107.6 King Tony America KT Pro 1071-38 38mm Combination Metric Wrench 12 Point   ...
  • HVLP Cap & Ring #909
    HVLP Cap & Ring #909
    Manufacturers Part #: 702724
    Your Price: $123.85Includes Free Shipping
    HVLP Cap & Ring #909  702724 Order No. for Air Cap - 702724 (HVLP) Application - Clear Coat Number on Cap - 909 Recommended Inlet Pressure bar/psi  - 1.5-1.8 bar  22-26 psi Air Flow LPM/SCFM - 396-453 LPM  14-16 SCFM NOTE: When removing air cap from retaining ring, don’t remove slip ring (2) or retaining ring seal (5) from retaining ring. Damage to the parts may occur. Slip ring and retaining ring seal are not available ...
  • Cut-off Wheel - Aluminum Oxide - 3" x 1/8" x 3/8" 54 Grit - 5 Pa
    Cut-off Wheel - Aluminum Oxide - 3" x 1/8" x 3/8" 54 Grit - 5 Pa
    Manufacturers Part #: 12708
    Your Price: $8.61
    Cut-off Wheel - Aluminum Oxide - 3" x 1/8" x 3/8" 54 Grit - 5 Pack 12708 Resin bonded, reinforced cut-off wheel. For steel cutting on many applications. Use on die grinders. Comply with ANSI B7.1 regulations. Maximum RPM 25,000 Shark Industries 12708  Cut-off Wheel - Aluminum Oxide - 3" x 1/8" x 3/8" 54 Grit - 5 Pack  ...

Current Reviews: 0