Compression Testers

Compression Testers

Compression testers are used to measure the compression pressure of an engine cylinder. This information can be used to diagnose engine problems such as worn pistons, rings, or valves. Compression testers are available in both analog and digital models. Analog models use a needle and gauge to display the compression pressure, while digital models display the pressure in numerical values.

Types of Compression Testers

  • Piston-type compression testers are the most common type of compression tester. They work by forcing air into the cylinder through a piston, which compresses the air and measures the pressure.
  • Diaphragm-type compression testers use a diaphragm to measure the compression pressure. The diaphragm is placed in the cylinder and compressed air is forced through it. The pressure of the air is then measured by the diaphragm.
  • Electronic compression testers use a sensor to measure the compression pressure. The sensor is placed in the cylinder and the compression pressure is measured electronically.

How to Use a Compression Tester

To use a compression tester, follow these steps:

  1. Remove the spark plugs from the engine.
  2. Connect the compression tester to the spark plug hole.
  3. Crank the engine over until the compression reaches its peak.
  4. Read the compression pressure on the gauge or display.

Interpreting Compression Test Results

The normal compression pressure for an engine varies depending on the engine size and type. However, a good rule of thumb is that all cylinders should have similar compression pressures. If one cylinder has significantly lower compression than the others, it indicates a problem with that cylinder.

Common Compression Tester Problems

  • Incorrectly connected hoses can cause inaccurate compression readings.
  • Leaking valves can also cause inaccurate compression readings.
  • Damaged spark plugs can prevent the engine from reaching its peak compression.

Conclusion

Compression testers are an essential tool for any automotive mechanic. They are relatively inexpensive and easy to use, and they can help you diagnose engine problems quickly and accurately.

Types of Compression Testers

  • Piston-type compression testers
  • Diaphragm-type compression testers
  • Electronic compression testers

How to Use a Compression Tester

  1. Remove the spark plugs from the engine.
  2. Connect the compression tester to the spark plug hole.
  3. Crank the engine over until the compression reaches its peak.
  4. Read the compression pressure on the gauge or display.

Interpreting Compression Test Results

The normal compression pressure for an engine varies depending on the engine size and type. However, a good rule of thumb is that all cylinders should have similar compression pressures. If one cylinder has significantly lower compression than the others, it indicates a problem with that cylinder.

Subscribe to our newsletter in order not to miss new arrivals, promotions, and discounts of our store

Thank you for subscribing!

Follow us on social media