Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Shop Equipment and Supplies > Adhesive - Tapes - Ties > Applicator Guns > A-Series Heavy Duty Applicator Gun - 7, 7.6 or 12

A-Series Heavy Duty Applicator Gun - 7, 7.6 or 12 Oz

A-Series Heavy Duty Applicator Gun - 7, 7.6 or 12 Oz

  • A-Series Applicator Guns will accommodate virtually any cartridge available today, dual or single component.
  • The design is compatible with all caulking, adhesive or seam-sealing applications.
  • The guns are ergonomically designed and come with molded hand grips for more operator comfort and less fatigue.
  • The construction is heavy-duty cast aluminum, with rugged welded steel supports and slides.
  • High capacity delivery of hi-viscosity primers and sealers.
  • These rugged guns produce a higher power ratio than most available models, resulting in a high mechanical advantage for maximum thrusting force.
  • The cartridge supports are designed to eliminate the breakage associated with some light weight models, and heavy duty push rods eliminate distortion problems under pressure.
  • These are the Applicator guns designed for professional performance, and are manufactured to the highest quality standards.
  • Users of these tools report reduced completion times and far superior results over existing models and methods.
    • 7 or 7.6 or 12 oz.
    • 150 x 150, 150 x 75, 100 x 100
    • Kent - DSG-2 90375
    • Lord Fusor - 300 - 1:1 ONLY, 309 - 1:1 ONLY
    • SEM - 70029, 70059
Motor Guard A-240 Heavy Duty Applicator Gun

  • Shipping Weight: 3.61lbs
  • Manufactured by: Motor Guard
  • Toolsource #: 107602
  • Manufacturers Part #: A-240
  • Also Known As: MCA-240

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct


$117.30

Related Products

  • Gravity Feed Spray Gun Support
    Gravity Feed Spray Gun Support
    Manufacturers Part #: GF-1
    Your Price: $35.07
    Accommodates most gravity-feed spray guns by use of an adjustable clip for retention of the gun.Equipped with a multi-position locking stand to accommodate accessory items attached to the inlet of the spray gun.Stand flips up, out of the way, and locks. Spray gun not included. Motor Guard GF-1 Gravity Feed Spray Gun Support ...
     Add to Cart  Details 
  • The Dust Doctor Sanding Block Cleaning Tool - 2/Pk
    The Dust Doctor Sanding Block Cleaning Tool - 2/Pk
    Manufacturers Part #: DD-2
    Your Price: $15.07
    Innovative Sanding Block Cleaner The All New DUST DOCTOR(R) from Motor Guard revolutionizes hand sanding by providing an instant means of cleaning loaded abrasive sheets. This unique tool utilizes microfiber technology to pull sanding dust right from the paper. By dramatically reducing material costs as well as cutting down on the time spent changing paper, the cost savings are immediate. Exclusive Features: Microfiber Outer Layer Traps Sanding ...
     Add to Cart  Details 
  • Optima Euro 900 LVLP Gun - 1.2mm
    Optima Euro 900 LVLP Gun - 1.2mm
    Manufacturers Part #: SG3211
    *this item has been discontinued
    Finishing technology taken to the next level! The Euro 900 sports an entirely new lightweight body with superb balance and ergonomics. Motor Guard's new technology, LVLP design, coupled with sonic internal air velocity, provides an extremely large, full-wet, soft fan pattern. The Euro 900 sets a new standard in the finishing industry. Built-in air regulation and a swivel air inlet come standard. This is the perfect gun for any medium to high sol...
  • disc - Optima 700 Gravity Spray Gun - 1.35mm
    disc - Optima 700 Gravity Spray Gun - 1.35mm
    Manufacturers Part #: SG3046
    Your Price: $519.52Includes Free Shipping
    Hi-pressure conventional spray gun, for general applications. Stainless steel needle, nozzle. Can be easily converted by the painter for gravity, siphon or pressure fluid delivery to fit any application. Replacment Nozzle: OP3103C Replacment Needle: OP3073C Replacment Air Cap: OP3110C Replacment Nozzle Set: OP3194 Repair Kit: OP3062 Gasket Kit: OP3015 Standard Cup: OP3496 - 600CC Gravity Cup Standard Cup: OP3066 - S1000 Siphon Cup 1 Liter Motor ...
     Add to Cart  Details 
  • Optima 500 HVLP Primer Spray Gun - 2.0mm
    Optima 500 HVLP Primer Spray Gun - 2.0mm
    Manufacturers Part #: SG3901
    *this item has been discontinued
    HVLP spray gun, for economic ultimate application of today's primers. Stainless steel needle, nozzle. The wide, full wet spray pattern produces virtually no overspray. Replacment Nozzle: OP3909F Replacment Needle: OP3910F Replacment Air Cap: OP3908F Replacment Nozzle Set: OP3906 Repair Kit: OP3903 Gasket Kit: OP3904 Standard Cup: OP3496 - 600CC Nylon Non-stock item, Manufacturer drop ship; please email service@toolsource.com for cost and lead ti...
  • Optima 500i HVLP Spray Gun - 1.4mm
    Optima 500i HVLP Spray Gun - 1.4mm
    Manufacturers Part #: SG3804
    *this item has been discontinued
    HVLP spray gun, for economic ultimate application of today's finishes.This "No Compromise" gun can be configured for any topcoat finish.Stainless steel needle, nozzle.Wide, full wet spray pattern. Replacment Nozzle: OP3909BReplacment Needle: OP3910BReplacment Air Cap: OP3908BReplacment Nozzle Set: OP3914 Repair Kit: OP3903Gasket Kit: OP3904Standard Cup: OP3496 - 600CC Nylon Motor Guard SG3804 Optima 500i HVLP Spray Gun - 1.4mm ...
  • disc - Optima 601 Conventional Primer Spray Gun - 1.8mm
    disc - Optima 601 Conventional Primer Spray Gun - 1.8mm
    Manufacturers Part #: SG3042
    Your Price: $201.43Includes Free Shipping
    Hi-pressure conventional spray gun, for economical general applications of primer. High quality, low cost primer gun. Replacment Nozzle: OP3147E Replacment Needle: OP3142E Replacment Air Cap: OP3143E Replacment Nozzle Set: OP3190 Repair Kit: OP3064 Gasket Kit: OP3144 Standard Cup: OP3496 - 600CC Motor Guard SG3042 Optima 601 Conventional Primer Spray Gun - 1.8mm ...
     Add to Cart  Details 
  • Optima DSP Conventional Spray Gun - 1.8mm
    Optima DSP Conventional Spray Gun - 1.8mm
    Manufacturers Part #: SG3023
    *this item has been discontinued
    Hi-pressure conventional spray gun, for hi-viscosity applications. High capacity delivery of hi-viscosity primers and sealers. Replacment Nozzle: OP3216E Replacment Needle: OP3152E Replacment Air Cap: OP3153E Replacment Nozzle Set: OP3005 Repair Kit: OP3064 Gasket Kit: OP3017 Standard Cup: OP3496 - 600CC Motor Guard SG3023 Optima DSP Conventional Spray Gun - 1.8mm ...
  • A-Series Med Duty Applicator Gun - 1.7 oz. 25 x 25
    A-Series Med Duty Applicator Gun - 1.7 oz. 25 x 25
    Manufacturers Part #: A-100
    Your Price: $62.68
    A-Series Applicator Guns will accommodate virtually any cartridge available today, dual or single component.The design is compatible with all caulking, adhesive or seam-sealing applications.The guns are ergonomically designed and come with molded hand grips for more operator comfort and less fatigue.The construction is heavy-duty cast aluminum, with rugged welded steel supports and slides.High capacity delivery of hi-viscosity primers and sealer...
     Add to Cart  Details 

Customers Also Shopped For:


Current Reviews: 0