1/2 In. Drive Metric Hex Bit Sockets
Hex bit sockets, also called Allen bit sockets, have a hex key bit held in a 1/2 in. drive socket body. They turn hex socket bolts and socket head cap screws with a ratchet, breaker bar or torque wrench, giving far more leverage than an L-shaped hex key. This category holds individual sockets in metric sizes, from small sizes such as 4mm up to larger sizes such as 14mm, in standard and long lengths, so a technician can buy one size or replace a worn or lost bit.
Standard or long
Standard length bits suit most fasteners with open access. Long bits reach hex bolts recessed in a housing or caliper bracket, or set behind other parts, without stacking extensions. Choosing 1/2 in. drive over smaller drives gives a stronger bit and drive for large and tight fasteners.
Using them
Clean rust and dirt out of the bolt head and seat the bit fully before applying force; a hex bit that sits partly in the head will round it out. Use a breaker bar to loosen a tight bolt and the ratchet to run it out. A worn bit with rounded corners should be replaced before it damages a fastener.
Metric hex bolts are common on brake calipers, suspension parts, transmissions and machinery. Auto and truck technicians, fleet shops and industrial maintenance crews use these sockets. Brands here include SK, Proto, Titan, Williams, GearWrench and Bondhus. Complete sets are in the 1/2 in. Dr. Metric Hex Bit Sets category.












































Follow us on social media