1/2" Computorq 3 Electronic Torque Wrench 25-250 ft-lb - CDI Torque Products

CDI Torque Products 2503CF3 1/2" Computorq 3 Electronic Torque Wrench 25-250 ft-lb

A COMPUTORQ 3 electronic torque wrench, standard model, with a 1/2" drive and a range of 25 - 250 ft. lb. (300 - 3000 in. lb., 33.8 - 338 Nm, 345 - 3456 kg. cm.). It is a digital readout wrench that displays real time torque values in ft. lbs., in. lbs., Nm or kg. cm. Set the desired torque value and apply force until the green LED illuminates.

Key Features

• Ratcheting head: 15-degree flex ratcheting head with push button socket release
• 3 color LED light bar: Yellow indicates approaching the desired torque setting, green indicates the desired torque value is reached, red indicates the fastener was overtorqued (loosen and retighten)
• Audible tone: Sounds when the set torque value is reached; an alarm tone sounds if it is exceeded
• Display hold: When the desired torque value is reached, the display holds the value and flashes for ten seconds
• Both directions: Torques in both clockwise and counterclockwise directions
• Battery: Uses 2 each CR123 lithium batteries; battery saving auto-shutoff after two minutes; remembers the last unit and torque setting selected
• Grip: Ergonomically designed molded non-slip rubber grip
• Calibration: N.I.S.T. traceable certificate of calibration included

Applications

Light industrial, automotive, motorcycle, watercraft and aircraft applications.

Specifications

• Manufacturer: CDI Torque Products
• Model: 2503CF3
• Drive: 1/2"
• Range, ft. lb.: 25 - 250
• Range, in. lb.: 300 - 3000
• Range, Nm: 33.8 - 338
• Range, kg. cm.: 345 - 3456
• Length: 27 in. (686 mm)
• Accuracy: ±2% CW and ±3% CCW of readings from 20% to 100% of full scale
• Torque units: ft. lbs., in. lbs., Nm, kg. cm.
• Batteries: 2 each CR123 lithium
• Model type: Standard model
• Calibration certificate: N.I.S.T. traceable certificate of calibration included