FP140 Mig Welder

Enhanced Magnetics! Providing a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 3/16" (4.8mm) thick in a single pass.

• Simple Operations! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Higher Output! The Fabricator 140 punches out 140 amp maximum output.
• Quick Change Polarity! Simple quick change (no tools required) polarity from within the wirefeed compartment.
• 2 lb/10lb Spool Capacity! Wire compartment design allows easy installation of 2lb, 10lb, 4" and 8" wire spool sizes.
• Overload Protection! Shuts down the power source to protect the internal electrical compenents from overheating.
• Heavy Duty Transformer! The transformer is built to last using premium quality 428 degree F materials and fully dip varnished then baked for 4 hours.
• Metal Feed Plate! The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• Quick Disconnect Fitting! Allows for quick and easy out-of-box assembly, along with convenient cleaning of the torch and replacement of liner.
• ISO 9001 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product.
• Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses.
• New Gun! Quality WeldSkill MIG Gun. 
  Included Features
• 10 ft. (3m) work cable and clamp. Power Cord & NEMA 5-15 115V plug, 10 ft. (3m) MIG Gun
• Gas Regulator / Flowgauge and hose Lifting handle
• .023" solid wire starter spool Handles .023"-.030"/.035" with reversible drive roll
• 3 extra contact tips
• Amperage Range 30-140 Amp
• Wire Feed Speed 80-700 IPM (2-18 m/min)
• 90 Amp at 18.5 V, 20% Duty Cycle