Fabricator 281 Welding System - Firepower

The Fabricator 281 provides best in class output of 300 Amp @ 40% duty cycle (250 Amp @ 60%). The wirefeeder conveniently fits on pivot mount on top of the power source. The wirefeeder can simply be lifted off the pivot and carried up on top of equipment or machinery 26 feet away. Additionally, the spool gun connects to the wirefeeder allowing even further distance. Simple operation, just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases. Overload protection shuts down the power source to protect the internal electrical components from over heating. Heavy duty transformer is built to last using premium quality 428 degrees materials and fully dip varnished then baked for 4 hours. New dual cylinder rack allows for easy cylinder mounting. New storage box is conveniently located in the wire compartment for all your drive rolls, tips and nozzles. Timer kit is a standard feature adding 2 step, 4 step trigger interlock, spot, dwell, stitch and weld timer. New heavy duty 2 roll drive system featuring quick change reversible drive rolls and easy to set single scaled wire tension knob for smooth repeatable performance. ISO 9001 Quality system guarantees the manufacture and distribution processes of his products. New digital displays - volt and amp meter displays actual welding values. Fabricator 281 comes with 15', 300 Amp WeldSkill TWECO MIG gun, 2 roll wirefeeder with 26' interconnection leads, 15' work cable and clamp, gas regulator/flowmeter, factory fitted dual cylinder rack and wheeling kit, .035"/.045" reversible drive roll, cable storage hook, comprehensive weld set-up chart , power cord and plug. Applications include maintenance and repair, garage/body shops, fabrication/construction, technical schools and farm/ranch.

Drop Ship Only

Features:

• 24 voltage taps - providing a wider operating range of 20 to 300 amps with an extremely smooth and stable arc characteristic
• Separate wirefeeder - the separate wire feeder gives you the ability to weld 26' from the power source
• Spool gun ready - new factory fitted "run ready" with 10 pin receptacle, just "plug and play"
• Quick change polarity - simple, quick change (no tools required) polarity and spool gun change-over from the front of the power source
• New Gun - 15' heavy duty Tweco Weldskill MIG gun

Fabricator 281 Welding System