Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Motorcycle Tools > V-Twin Motorcycle Tools > H-D Cruise Drive 6-Speed Main Drive Gear, Bearing & Seal Insta

H-D Cruise Drive 6-Speed Main Drive Gear, Bearing & Seal Install

H-D Cruise Drive 6-Speed Main Drive Gear, Bearing & Seal Install
H-D Cruise Drive 6-Speed Main Drive Gear, Bearing & Seal Installer Tool 986

Use on all 2006-present Dyna™ and 2007
FL & FXST

Use this tool to safely install new main drive gear
bearings and seal, use JIMS® No.944 of a small 3-ton
press. This tool will hold bearings and seal square to
it’s bore, eliminating any marring of the bearings and
seals and installing both to the right depth. This tool
is used in the same manner as JIMS® Tool No.37842-
91 that you’ve used for years.

JIMS USA JIM  986 H-D Cruise Drive 6-Speed Main Drive Gear, Bearing & Seal Installer Tool
  • Manufactured by: JIMS USA
  • Toolsource #: 111251
  • Manufacturers Part #: 986
  • Also Known As: JIM986

Only 1 left in stock - order soon

$91.62

Related Products

  • Bike Center Jack
    Bike Center Jack
    Manufacturers Part #: 904
    Your Price: $375.35
    Bike Center Jack 904 This scissors type jack can lift either the front or rear of most motorcycles to perform wheel assembly service work. Order non-skid rubber pad separately for mounting to top of jack surface. Use with JIMS® alignment tool No.964. JIMS USA JIM 904 Bike Center Jack ...
  • Big Twin Timken Bearing Remover
    Big Twin Timken Bearing Remover
    Manufacturers Part #: 1709
    Your Price: $209.10
    Big Twin Timken Bearing Remover 1709 Use on all Big Twin 1955-02. (Note: Includes JIMS® Twin Cam®.) This tool will remove the sprocket shaft Timken® bearing on late Big Twins, 1986-present, with an integral sprocket shaft. A specialized tool that does the job better than anything else on the market. JIMS USA JIM 1709 Big Twin Timken Bearing Remover ...
  • Big Twin Sprocket Locker
    Big Twin Sprocket Locker
    Manufacturers Part #: 2260
    Your Price: $140.24
    Big Twin Sprocket Locker 2260 Use on all Shovel or EVO 1980-1999 Belt Driven. Use on Twin Cam® 1999-05 FXD, 1999-06 FL, and 2000-06 FXST. Works on aftermarket 5 or 6-speeds. Use to lock final drive sprocket. For removing and installing sprocket nut, use with JIMS® tool No.94660-37A. JIMS USA Jims 2260 Big Twin Sprocket Locker ...
  • Big Twin Pinion Gear Locker Tool
    Big Twin Pinion Gear Locker Tool
    Manufacturers Part #: 2237
    Your Price: $124.54
    Big Twin Pinion Gear Locker Tool 2237 Use on Big Twin 1954-present single cam only. (Note: Includes aftermarket motors.) Use to lock pinion gear, necessary to torque the pinion nut. Tool is simple to use, just align underneath gear and screw into case. Use JIMS® tool No.94555- 55A to tighten pinion nut. Instruction sheet No.2237-IS. JIMS USA JIM 2237 Big Twin Pinion Gear Locker Tool ...
  • Big Twin Cam Seal Installer and Remover
    Big Twin Cam Seal Installer and Remover
    Manufacturers Part #: 2243
    Your Price: $119.76
    Big Twin Cam Seal Installer and Remover 2243 Use on all Big Twin 1970-present single cam only. Use to install and remove a 1970-present cam seal without removing the cam cover. This tool is very simple to use. Just mount tool in cover, screw in the two removing screws, turn center, and out comes the cam seal. The new seal is pressed in with the same tool, square and flat for a no leak fit. This tool will also remove cam cover from case. JIMS USA ...
  • Big Twin Engine Rotator, From The Flywheel Sprocket Shaft
    Big Twin Engine Rotator, From The Flywheel Sprocket Shaft
    Manufacturers Part #: 976
    Your Price: $98.21
    Big Twin Engine Rotator, From The Flywheel Sprocket Shaft  976 Use on all Big Twins 1955-06 except 2006 FXD's. Use on 1999-05 FXD's. Use this tool to rotate the flywheel / piston assembly, with the engine still in frame or on a bench. This tool is used to rotate the flywheel assembly when doing pushrod adjustments, when building big inch engines, checking operating clearances such as piston to piston, or valve to valve. Can also be used to h...

Customers Also Shopped For:

  • H-D Cruise Drive 6- Speed Main Drive Gear Installer Tool
    H-D Cruise Drive 6- Speed Main Drive Gear Installer Tool
    Manufacturers Part #: 981
    Your Price: $269.62
    H-D Cruise Drive 6- Speed Main Drive Gear Installer Tool  981 Use on all 2006-present Dyna™ and 2007- present FL & FXST. Use this tool to safely install a new or newly repaired main drive gear. This job can be performed with the transmission still in the frame, with hand tools. This tool will hold the main drive gear square to it’s bearing bore, eliminating any marring of gear or bearings. JIMS USA JIM 981 H-D Cruis...
  • 5-Speed Transmission Main Drive Gear Tool
    5-Speed Transmission Main Drive Gear Tool
    Manufacturers Part #: 35316-80
    Your Price: $210.84
    5-Speed Transmission Main Drive Gear Tool 35316-80 Use on all 1980-99 EVO & Shovel Big Twin 5-Speed. Use on Twin Cam® 1999-05 FXD, 1999-06 FL and 2000-06 FXST. Use on Sportster® & Buell® 1991-present (including Buell® Blast), except 1125R. Use to remove and install the main drive gear. Also installs the main bearing without removing transmission case. This tool will NOT damage bearing or main drive gear during installation...
  • Big Twin Timken Bearing Remover
    Big Twin Timken Bearing Remover
    Manufacturers Part #: 1709
    Your Price: $209.10
    Big Twin Timken Bearing Remover 1709 Use on all Big Twin 1955-02. (Note: Includes JIMS® Twin Cam®.) This tool will remove the sprocket shaft Timken® bearing on late Big Twins, 1986-present, with an integral sprocket shaft. A specialized tool that does the job better than anything else on the market. JIMS USA JIM 1709 Big Twin Timken Bearing Remover ...
  • H-D Cruise Drive 6- Spd Transmission Main Bearing Installer Tool
    H-D Cruise Drive 6- Spd Transmission Main Bearing Installer Tool
    Manufacturers Part #: 987
    Your Price: $169.28
    H-D Cruise Drive 6- Spd Transmission Main Bearing Installer Tool 987 Use on all 2006-present Dyna™ and 2007- present FL & FXST. Use this tool to safely install a new main bearing using hand tools. This job can be performed with the transmission still in the frame. Tool will hold bearing square to it’s bore, eliminating any marring of the bearing bore. This tool is used in the same manner as JIMS® Tool No.35316-80 that you&rsqu...
  • 3/8 Inch Drive SAE 12 Point Socket and Drive Tool Set 15-Pc
    3/8 Inch Drive SAE 12 Point Socket and Drive Tool Set 15-Pc
    Manufacturers Part #: 50673
    Your Price: $31.71
    All tools are professional quality, made of high-grade chrome vanadium steelSockets feature SUPERTORQUE(R) lobular openings for greater turning power without deforming the fastenerPacked in rugged compact high-density polyethylene (HDPE) cases that are strong and durable yet light in weightImported (Taiwan) Contents Include: 3/8" Drive Tools: 31001 7-3/4" Pear Head Ratchet31002 3" Extension31003 6" Extension31006 Universal Joint 3/8" Drive Shall...
  • 3/8 Inch Drive Deep 6 Pt Fractional SAE Impact Socket Set on Cli
    3/8 Inch Drive Deep 6 Pt Fractional SAE Impact Socket Set on Cli
    Manufacturers Part #: WS-12-12
    Your Price: $65.12
    SUPERTORQUE(R) lobular openings for greater turning power without deforming the fastener.Designed for maximum engagement on 6 point fasteners.Suitable for use with pneumatic and electric impact wrenches.Specially heat treated for impact use to provide long life, safety, and durability.Hand tools made in U.S.A. for automotive, industrial, or general purpose use. Contents Include: Product Code Size 12-610 5/16"12-612 3/8"12-614 7/16"12-616 1/2"12-...

Current Reviews: 0