Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Lifting Equipment > Transmission Jacks > 1 Ton Floor Style Transmission Ja

1 Ton Floor Style Transmission Jack

1 Ton Floor Style Transmission Jack
  • Wishbone design allows unit more mobility.
  • Tubular steel frame.
  • 360 degree swivel casters.
  • Load restraint chain.
  • Designed for heavy duty transmissions, including:
    • Fuller road rangers
    • Spicer 50,60,5000,6000 and split torque (SST) series
    • Mack T-2000 and Maxitorque series
    • Allison AT, MT and HT series
    • Clark 280, 282, 285, CL455 and CL550
    • Mercedes G3 and GV4 types
    • Volvo S & R models
    • Iveco 31, 35, 46 and 2828 models
  • Made in U.S.A.
    • Minimum Height 10-1/4"
    • Maximum Height 44-3/4"
    • Chassis Length: 47-3/8"
    • Chassis Width 28-1/4"
    • Forward Tilt 44°
    • Rear Tilt 39°
    • Sideways Tilt 13° L & R
    • Gross Weight 310 Lbs.
    $85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.
    • *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
    • *For lift-gate service, add $135.00.
    Hein-Werner HW93718 1 Ton Floor Style Transmission Jack
    • Shipping Weight: 310lbs
    • Manufactured by: Hein-Werner Automotive
    • Toolsource #: 100879
    • Manufacturers Part #: HW93718
    • Also Known As: HW93718, HWA-HW93718, OMEHW93718

    Usually In Stock
    Usually ships in 24-48 hours
    Manufacturer Direct


    Customers Also Shopped For:

    • Counterbore Tool
      Counterbore Tool
      Manufacturers Part #: ZTSE2514
      Your Price: $2,222.65Includes Free Shipping
      OTC Tools For International trucks. This Counterbore Tool is specifically engineered to reduce downtime by providing fast set-up and ease of operation. Counterbore depth checks can be made using a dial indicator depth gauge while the Counterbore Tool is mounted on the block. Applications: DT / DTA 360 / 466, DT 466 / 530 (PLN), DT 466/ 530E, DT 466/ 570, HT 570 Please note when cutting #1 cylinder you must use ZTSE25141 Base Plate and Spac...
    • 1/2 In Dr Impact Socket, 6 Pt, Std, 1 In
      1/2 In Dr Impact Socket, 6 Pt, Std, 1 In
      Manufacturers Part #: 232
      Your Price: $5.92
      1/2" Drive Impact Socket, 6 Point, Standard, Size 1" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
    • Pull Plate Kit - 20-Pc
      Pull Plate Kit - 20-Pc
      Manufacturers Part #: 0805
      Your Price: $58.87
      20-Pc Tac-N-Pull Replacement Plate Kit For hard - to - hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Kit includes (10) 1" pull plates (#0801), (5) 1 1/2" pull plates (#0802), and (5) 3" pull plates (#0803)....
    • T-Style Coupler - 1/4 In NPT Female Oversize Sleeve
      T-Style Coupler - 1/4 In NPT Female Oversize Sleeve
      Manufacturers Part #: 787
      Your Price: $6.15
      T-Style Coupler - 1/4 In NPT Female Oversize Sleeve Ring All "T" style coupler bodies are brass, with steel sleeves. Warning for use with shop air only. Specifications: Maximum inlet pressure: 300 PSIMaximum temperature: 250° FAir flow: 40 SCFMSeals, Buna-N. ...
    • Toyota A/C Clamp Removal Tool
      Toyota A/C Clamp Removal Tool
      Manufacturers Part #: TOY200
      Fits both Toyota AC clamps, used on high and low pressure lines  Applicable to 1998 and newer Toyota models  Stainless steel release pins  Identifications and instructions are laser marked on the handle ...
    • 4 Flute Tap Extractor - 6mm (1/4 In)
      4 Flute Tap Extractor - 6mm (1/4 In)
      Manufacturers Part #: 10254
      Your Price: $14.14
      Here`s all there is to it... 3 Simple Steps for removing broken taps the easy wayThoroughly remove all chips of the broken tap. Insert the extractor fingers into the flutes of the broken tap, pushing them gently but firmly into position.Push the holder down until it touches the broken tap. Slide the sleeve down until it touches the work. (Both are important.)Apply a tap wrench to the square end of the holder. Twist forward and backward a few time...

    Current Reviews: 0