Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Taps and Dies > Cut Thread Fractional Taper Tap - 5/16In 18

Cut Thread Fractional Taper Tap - 5/16In 18 NC

Cut Thread Fractional Taper Tap - 5/16In 18 NC
  • High carbon steel cut thread fractional tap - 5/16"-18 NC taper tap.
  • Designed and manufactured to handle the most difficult hand tapping applications.
  • Taper, plug and bottoming styles are available.
  • Highly polished flutes - aid in chip removal.
  • Taps produce a class 2B thread.
  • No. of flutes - 4.
  • Made in USA.
    • Shipping Weight: 0.03lbs
    • Manufactured by: Hanson
    • Toolsource #: 73536
    • Manufacturers Part #: 1327
    • Also Known As: AHN-1327, HA1327, HAN1327, HN1327

    Only 5 left in stock - order soon

    Inventory available from other suppliers, prices may be different

    $2.60

    Customers Also Purchased:

    Customers Also Shopped For:

    • Syringe Oil Injector - 2 Oz
      Syringe Oil Injector - 2 Oz
      Manufacturers Part #: 2731
      Your Price: $8.09
      Syringe Oil Injector - 2 Oz 6" extension hose.2 ounce plastic plunge oil injector.Inject oil into system during service (non-pressurized - open system).Easily inject correct amount of oil into compressor, evaporator, accumulator, drier, or condenser. NOTE: This injector isnot designed to inject oil into a system under pressure....
    • Double EyeT Chain Hook
      Double EyeT Chain Hook
      Manufacturers Part #: 1650
      Your Price: $84.89
      Double EyeT Chain Hook A handy chain hook - up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self - tightening clamps, can be made from the same pulling tower or pulling post. Features Mo - Clamp easy chain hook - up system. Designed for use with 3/8" chain. Overall length: 6 1/2" (165 mm).Weight: 3 lbs. (1.36 kg). Capacity: 8 tons (7,257 kg)....
    • Cut Thread Fractional Taper Tap - 5/16 Inch 24 NF
      Cut Thread Fractional Taper Tap - 5/16 Inch 24 NF
      Manufacturers Part #: 1329
      Your Price: $2.60
      High carbon steel cut thread fractional tap - 5/16"-24 NF taper tap.Designed and manufactured to handle the most difficult hand tapping applications.Taper, plug and bottoming styles are available.Highly polished flutes - aid in chip removal.Taps produce a class 2B thread.No. of flutes - 4.Made in USA. ...
    • Pencil Flame Torch
      Pencil Flame Torch
      Manufacturers Part #: BRHTPKIT
      Your Price: $25.91
      Applications: Soldering copper pipesLoosening rusty nuts / boltsThawing frozen metal pipesRemoving paint or putty Flame tips included: 2" wide heating tip (5.1 cm)Round tip for brazing tubes Tubing Capacity: Soft Solder: up to 7/8" (2.2cm)Silver Braze: up to 3/8" (1 cm) MAP / PRO™ Soft Solder: up to 1" (2.5 cm)Silver Braze: up to 5/8" (1.6 cm) CPS Products BRHTPKIT Pencil Flame Torch ...
    • SUPER SLICKEM (GALLON)
      SUPER SLICKEM (GALLON)
      Manufacturers Part #: 12904
      Your Price: $15.58
      • Gaither’s Super Slick’em® should be applied to all tires before being mounted or before deflation if being dismounted. • Super Slick’em® is a special non-water based lubricant that penetrates and aids in breaking the tire bead from the wheel by eating away rust and grease. • Because it does not contain water, Super Slick’em® will not freeze or cause rust to form. • Must Purchase min of 4 gallon containers to receive applicato...
    • 1" Drive Lightweight Impact Wrench, 1,200 ft-lbs1,627 Nm
      1" Drive Lightweight Impact Wrench, 1,200 ft-lbs1,627 Nm
      Manufacturers Part #: 801200
      Your Price: $467.78Includes Free Shipping
      1" Drive Lightweight Impact Wrench, 1,200 ft-lbs1,627 Nm  801200 Air Pressure 90 PSIG / 620 KPa Torque Range NA Max. Torque 1,200 ft-lbs/ 1,627 Nm Free Speed 6,000 rpm Standard Bolt Cap 1-1/2 in. / 38 mm Net Weight 9.3 lbs. / 4.2 kg Overall Length 8.5 in. / 216 mm Avg. Air Consumption 6.0 cfm Air Inlet 1/4 in. Minimum Hose Size 3/8 in. / 10mm Machine Design Twin Hammer 4200 g CODE: 070000 ...

    Current Reviews: 0