Strut and Spring Compressors
A coil spring on a strut or suspension holds a great deal of stored energy, so it has to be compressed before a strut is taken apart or a spring is removed. Spring compressors hold the coils together so the strut mount or control arm can be released, then let the spring back out slowly once the new part is in. Auto repair technicians, suspension and alignment shops, tire shops and fleet shops use them for strut replacement, spring replacement and ride height work.
Choosing the right type
Hand-held coil spring compressors use a pair of threaded rods with hooks or jaws that grab opposite sides of the spring, turned evenly to draw the coils together. Single action compressors and compressor kits use jaws or plates sized for different spring diameters to hold the spring more securely. Vehicle-specific strut tools, such as a strut tool made for Volvo, handle designs where a general compressor does not fit or hold well. Related suspension items, such as leaf spring pin sockets, also sit in this category.
What to look at
Match the compressor jaws or plates to the spring diameter and coil spacing, and check that the tool covers the strut types your shop sees most. Kits with several jaw sizes cover more vehicles, while a dedicated tool is often faster for a model a shop sees every day.
Using them
Seat the jaws fully on the coils, opposite each other, and tighten in even steps so the spring compresses straight. Compress only enough to take the load off the top mount before removing the strut nut, and release the spring slowly when the job is done. Follow the tool instructions and the vehicle service procedure, and inspect jaws and threads for wear before each use.
Brands include Gedore, OTC, Kent-Moore, S&G Tool Aid, Kukko and CTA. Ball joint, tie rod and wheel alignment tools are in nearby Tire Tools, Wheels and Suspension categories.




















































Follow us on social media