Power Steering Pump Pulley Remover and Installer

Impact quality tool.
One-piece tool designed for removing and installing power steering pump pulley on must domestic vehicles. Including early GM, Chrysler, and Ford.
Use on pulleys with grooved hub diameters of 1-1/8", 1-1/4", 1-5/16", and 1-3/8".
Removes and installs GM belt-driven vacuum pumps and pressed-on water pump pulleys on GM 4 and 6 cyclinder.
Includes blow-molded case.

Kastar 5239B Power Steering Pump Pulley Remover and Installer

Shipping Weight: 2.4lbs
Manufactured by: Kastar
Toolsource #: 71770
Manufacturers Part #: 5239B
Also Known As: KAS5239B, KH5239B, LNG-5239B

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

$85.36

Customers Also Purchased:

Tire Tread Depth Gage

Manufacturers Part #: 448
Your Price: $6.18
Round aluminum indicator bar calibrated for 0 to 1" in 1/32" markings. Handy pocket clip. Milton Industries 448 Tire Tread Depth Gage ...
Add to Cart Details
Ignition Spark Tester

Manufacturers Part #: 50850
Your Price: $7.90
A handy tool to check ignition spark without removing the spark plug.The tool is specially calibrated to measure ignition voltage.Works on both standard and electronic ignition systems.Easy to use. Simply adjust calibration screw to proper gap size. Attach spark plug wire to end of tester. Clamp tester on engine to ground. Crank engine and check for spark. Lisle 50850 Ignition Spark Tester ...
Add to Cart Details
HCS Metric Thread Plug Tap - 14mm - 1.50mm

Manufacturers Part #: 1750
Your Price: $9.44
Ideal for auto repair where metric threads are specified.Durable vinyl pouch protects taps when not in use.Made in USA. Irwin Hanson 1750 HCS Metric Thread Plug Tap - 14mm - 1.50mm ...
Add to Cart Details
Economy Service Cart 350 Lb Load Capacity

Manufacturers Part #: 8003SC
Your Price: $132.64
Load Capacity 350 Lbs. Large, easy to maneuver 4" wheels: 2 locking and 2 standard Durable powder coated finish 3" Deep shelves (30" long x 16" wide) Easily outfit the new economy service cart with a locking drawer (8006RB) and/or a locking screw driver/pry bar holder (8008) Dimensions: 32-1/2" high x 16" wide x 30" longShipping Weight 37.5 Lbs. Sunex 8003SC Economy Service Cart ...
Add to Cart Details
Noid Lite Deluxe & GM Signal Test Light Set

Manufacturers Part #: 7898
Your Price: $20.23
The most economic way to check electronic fuel injection (EFI) signals. Quickly and easily checks for systems of GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI.To test, just disconnect the fuel injectors, plug the noid lite into injector wiring harness then crank the engine.Normal voltage is indicated by flashing light which is visible from passenger compartment.Blow molded case for easy storage and transport. Astro Pneumatic 7898 Delu...
Add to Cart Details
Fuel Module Disconnect Tool for GM

Manufacturers Part #: 37500
Your Price: $7.40
Fuel Module Disconnect Tool for GM The 2 piece design allows access to the connectors.Slide the proper size end into the connector. Then rotate and slide the other half in place. Now the module can be disconnected.Fits both 3/8i? 1/2 and 5/16i? 1/2 connector sizes. Will also fit all other 3/8i? 1/2 and 5/16i? 1/2 applications.The tool can be clipped together for convenient storage.Shipping wt. 1 oz....
Add to Cart Details

Customers Also Shopped For:

Power Steering Pulley Installer

Manufacturers Part #: C-4063D
Your Price: $148.02
Use this tool with various adapters to install the power steering pump pulley on Chrysler Corporate vehicles. Current Usage* 2006 (CS, DR, JR, KJ, LX, PT, RS, TJ) - System (19 - Steering) 2007 (CS, JS, KJ, LX, PT, RS) - System (19 - Steering) 2008 (CS, JS, LC, LX, PT, RT) - System (19 - Steering) 2009 (JC, JS, LC, LX, PT, RT) - System (19 - Steering) 2010 (JC, JS, LC, LX, PT, RT) - System (19 - Steering) 2011 (JC, JS, LC, RT) - System (19 - Stee...
Add to Cart Details
Ford Power Steering Pump Pulley Installer T91P-3A733-A

Manufacturers Part #: 7771A
Installs power steering pump pulleys on 1992-newer Ford Crown Victoria and Mercury Grand Marquis with 4.6 V8 engine, 1997-newer Ford truck with 4.2 & 4.6 V6, 5.4 V8, and 6.8 V10 engines.8 mm x 1.25" threads fit Ford's C111 pump.The 4.6L modular engine that Ford & Mercury use on their 1991 & newer models presents special problems of its own when it comes to installing the power steering pump pulley.A required tool to ensure that the pulley or pum...
Power Steering Pump/Alternator Remover/Installer Tool

Manufacturers Part #: 4681
Your Price: $59.99
Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys.Also removes and installs other press-fit pulleys with a hub diameter of 1-1/8" (28mm), 1-1/4" (32mm), 1-5/16" (34mm), or 1-3/8" (35mm). SPX OTC 4681 Power Steering Pump/Alternator Remover/Installer Tool ...
Add to Cart Details
Gen-Nex Painters Coverall Small

Manufacturers Part #: 6851
Your Price: $12.94
Anti-StaticCloth-Like FiberFull Zipper Front and Elastic WristsNon-Elastic Ankle Cuffs.Available in six sizes. SAS Safety Corporation 6851 Gen-Nex Painters Coverall Small ...
Add to Cart Details
Stinger Power Steering/Alternator Pulley Puller/Installer Set

Manufacturers Part #: 4529
Your Price: $44.98
Properly replaces pressed-on power steering and alternator pulleys on Ford, Chrysler, and late GM engines.Housed in a blow-molded plastic storage case.OTC Stinger products have a 2-year warranty . OTC 4529 Stinger Power Steering/Alternator Pulley Puller/Installer Set ...
Add to Cart Details
Power Steering Pump Pulley Remover

Manufacturers Part #: J-25034C
Your Price: $113.05
Power Steering Pump Pulley Remover J-25034C Used on all models except Quad 4 and U-Van, Isuzu. Kent-Moore J-25034C Power Steering Pump Pulley Remover ...
Add to Cart Details

Current Reviews: 0

Tire Tools, Wheels & Suspension > Steering Pump Pulleys > Power Steering Pump Pulley Remover and Install

Power Steering Pump Pulley Remover and Installer

Customers Also Purchased:

Customers Also Shopped For: