Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Spotweld Cutters > Spot-Eze Spot Weld Remover K

Spot-Eze Spot Weld Remover Kit

Spot-Eze Spot Weld Remover Kit

A must for the autobody professional who`s tired of fighting an age-old problem of spot-welds.

Features:

  • Speeds up & simplifies a time consuming & troublesome spot weld removal operation on car bodies.
  • An inexpensive compound drill, kit includes four sizes, 5/16 and 3/8 cut diameter in 2" and longer 3" lengths.
  • Simplified construction allows it to resharpen easier than a standard drill.
  • The replaceable center starting drill allows the main drill body to start quickly & guides the total drill in removing the weld in the outermost panel only.
  • No pre-punching is necessary!
  • Spot-Eze, because of its unique design, will not walk off the spot weld area and is capable of removing spot welds in awkward angles.
  • Leaves the attachment panel w/ an extremely small hole, which can be later used for plug welding.
Wivco TH25000 Spot-Eze(TM) Spot Weld Remover

  • Manufactured by: Wivco Design
  • Toolsource #: 50959
  • Manufacturers Part #: TH25000
  • Also Known As: WITH25000, WIV-TH25.000

Only 1 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $100.00
You save: $4.49
$95.51

Frequently bought together:


Related Products

  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
  • Rocker-Doctor Universal Tie Down & Pull Clamp
    Rocker-Doctor Universal Tie Down & Pull Clamp
    Manufacturers Part #: TH14000
    Your Price: $87.55
    The clamp is made of U.S. Chrome Moly Tool Steel & has a four ton capacity.It will effectively straighten door frames, quarter panels, hoods, fenders, rocker panels, rear decks & sub frames.A new low cost uni-body tie down & pull clamp that will pull sheet metal panels better than any other method, where no access to the back is available & straight line pulling is required.It is a method approved for pulling the new hi-carbon steel box members ...
  • Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Manufacturers Part #: TH28000
    Your Price: $48.59
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
  • `The Skinner` Door Panel Installation Tool
    `The Skinner` Door Panel Installation Tool
    Manufacturers Part #: TH15000
    Your Price: $101.89Includes Free Shipping
    "The Skinner" Door Panel Installation Tool - Does not damage outside of door panel! The low cost of this tool is far less than a new replacement door panel. The savings from grinding discs alone, not to mention the time and plastic filler saved, will more than pay for this tool in a very short time.The Skinner will fold the new door panel lip over in one easy operation when used with a 3/8" hand ratchet and 3" extension. This tool floats on a "T...
  • WIV-E Spot-Weld Remover - 5/16 In
    WIV-E Spot-Weld Remover - 5/16 In
    Manufacturers Part #: TH40000
    Your Price: $13.23
    A revolutionary new spot-weld remover has been invented by WIVCO Tool. Called the "WIV-E"™. It is made totally in the USA. It's ground in one chucking from a solid rod of High-Speed Steel. A new "State of the Art" compound-radii chisel cutting center and truly unique fluting makes the "WIV-E"™ a dream come true for every AUTO-BODY professional to enjoy. A "WIV-E"™ will remove spot-welds using a hand electric drill, a 1,000 RPM air ...
  • WIV-E Spot-Weld Remover - 1/2 In
    WIV-E Spot-Weld Remover - 1/2 In
    Manufacturers Part #: TH40003
    Your Price: $18.84
    A revolutionary new spot-weld remover has been invented by WIVCO Tool. Called the "WIV-E"™. It is made totally in the USA. It's ground in one chucking from a solid rod of High-Speed Steel. A new "State of the Art" compound-radii chisel cutting center and truly unique fluting makes the "WIV-E"™ a dream come true for every AUTO-BODY professional to enjoy. A "WIV-E"™ will remove spot-welds using a hand electric drill, a 1,000 RPM air ...
  • WIV-E Spot-Weld Remover - 1/4 In
    WIV-E Spot-Weld Remover - 1/4 In
    Manufacturers Part #: TH40001
    Your Price: $13.71
    A revolutionary new spot-weld remover has been invented by WIVCO Tool. Called the "WIV-E"™. It is made totally in the USA. It's ground in one chucking from a solid rod of High-Speed Steel. A new "State of the Art" compound-radii chisel cutting center and truly unique fluting makes the "WIV-E"™ a dream come true for every AUTO-BODY professional to enjoy. A "WIV-E"™ will remove spot-welds using a hand electric drill, a 1,000 RPM air ...
  • WIV-E 3/8 Spot-Weld Remover - 3/8 In
    WIV-E 3/8 Spot-Weld Remover - 3/8 In
    Manufacturers Part #: TH40002
    Your Price: $18.27
    A revolutionary new spot-weld remover has been invented by WIVCO Tool. Called the "WIV-E"™. It is made totally in the USA. It's ground in one chucking from a solid rod of High-Speed Steel. A new "State of the Art" compound-radii chisel cutting center and truly unique fluting makes the "WIV-E"™ a dream come true for every AUTO-BODY professional to enjoy. A "WIV-E"™ will remove spot-welds using a hand electric drill, a 1,000 RPM air ...

Customers Also Purchased:

  • Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Manufacturers Part #: TH25005
    Your Price: $20.24
    Spot-Eze speeds up and simplifies a time-consuming and troublesome spot-weld removal operation on car bodies. It is an inexpensive compound drill, available in four sizes, 5/16" and 3/8" cut diameter, and in a 2" and longer 3" length. Spot-Eze simplified construction allows it to resharpen easier than a standard drill. The replaceable center starting drill allows the main drill body to start quickly and guides the total drill in removing the wel...
  • `The Skinner` Door Panel Installation Tool
    `The Skinner` Door Panel Installation Tool
    Manufacturers Part #: TH15000
    Your Price: $101.89Includes Free Shipping
    "The Skinner" Door Panel Installation Tool - Does not damage outside of door panel! The low cost of this tool is far less than a new replacement door panel. The savings from grinding discs alone, not to mention the time and plastic filler saved, will more than pay for this tool in a very short time.The Skinner will fold the new door panel lip over in one easy operation when used with a 3/8" hand ratchet and 3" extension. This tool floats on a "T...
  • Single Spring Brake Tool - GM
    Single Spring Brake Tool - GM
    Manufacturers Part #: 50600
    Your Price: $24.41
    Supersedes Lisle p/n 49900 Releases tension on both large and small GM single spring brakes during servicing.Many GM brakes use a heavy single spring. The 5066 engages the spring and quickly releases the spring tension. The brake can then be disassembled to replace brake shoes, emergency brake cable or service the brake cylinder.Supersedes Lisle 49900 which works on the small spring only.Shipping weight: 1 lb. 8 oz. Lisle 50600 Single Spring Bra...
  • Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Manufacturers Part #: TH28000
    Your Price: $48.59
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
  • Spot Weld Drill Bit - 3/8 - 3 In
    Spot Weld Drill Bit - 3/8 - 3 In
    Manufacturers Part #: TH25004
    Your Price: $22.09
    Spot-Eze speeds up and simplifies a time-consuming and troublesome spot-weld removal operation on car bodies. It is an inexpensive compound drill, available in four sizes, 5/16" and 3/8" cut diameter, and in a 2" and longer 3" length. Spot-Eze simplified construction allows it to resharpen easier than a standard drill. The replaceable center starting drill allows the main drill body to start quickly and guides the total drill in removing the weld...
  • Rotabroach Kit - SAE 5/16-3/4In - 10-Pc
    Rotabroach Kit - SAE 5/16-3/4In - 10-Pc
    Manufacturers Part #: 11090N
    Your Price: $77.50
    For heavy-duty use in sheet metal & materials up to 1/2" thickAlso for rustproofing and spotweld removal. Blair Equipment 11090N 10 Piece Rotabroach Kit - SAE 5/16" - 3/4" ...

Customers Also Shopped For:

  • `The Skinner` Door Panel Installation Tool
    `The Skinner` Door Panel Installation Tool
    Manufacturers Part #: TH15000
    Your Price: $101.89Includes Free Shipping
    "The Skinner" Door Panel Installation Tool - Does not damage outside of door panel! The low cost of this tool is far less than a new replacement door panel. The savings from grinding discs alone, not to mention the time and plastic filler saved, will more than pay for this tool in a very short time.The Skinner will fold the new door panel lip over in one easy operation when used with a 3/8" hand ratchet and 3" extension. This tool floats on a "T...
  • Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Manufacturers Part #: TH25005
    Your Price: $20.24
    Spot-Eze speeds up and simplifies a time-consuming and troublesome spot-weld removal operation on car bodies. It is an inexpensive compound drill, available in four sizes, 5/16" and 3/8" cut diameter, and in a 2" and longer 3" length. Spot-Eze simplified construction allows it to resharpen easier than a standard drill. The replaceable center starting drill allows the main drill body to start quickly and guides the total drill in removing the wel...
  • Cobalt Drill Bit, 17/64 In Diameter
    Cobalt Drill Bit, 17/64 In Diameter
    Manufacturers Part #: 12667
    Your Price: $3.78
    Cobalt Drill Bit, 17/64" Diameter Overall length 4-1/8". Flute length 2-7/8". Specially designed for drilling stainless steel and other hard, abrasive materials. Designed to withstand high drilling heat. 135 degree split point cuts immediately on contact - no center punch needed. Ideal for contractors, maintenance, machine shops and garages. ...
  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
  • Rocker-Doctor Universal Tie Down & Pull Clamp
    Rocker-Doctor Universal Tie Down & Pull Clamp
    Manufacturers Part #: TH14000
    Your Price: $87.55
    The clamp is made of U.S. Chrome Moly Tool Steel & has a four ton capacity.It will effectively straighten door frames, quarter panels, hoods, fenders, rocker panels, rear decks & sub frames.A new low cost uni-body tie down & pull clamp that will pull sheet metal panels better than any other method, where no access to the back is available & straight line pulling is required.It is a method approved for pulling the new hi-carbon steel box members ...
  • 1-7/16 Inch Fractional SAE Angle Wrench- Black
    1-7/16 Inch Fractional SAE Angle Wrench- Black
    Manufacturers Part #: BLK3725
    Your Price: $41.19
    1-7/16 Inch Fractional SAE Angle Wrench- Black  BLK3725 Wrench Opening    1 7⁄16 X 1 7⁄16  Diameter of Head A 2 5⁄8 Thickness of Head B  13⁄32   Length C 12 1/2 Wt .Ea. Lbs. 1.2 Std.Pkg.Qty 1 Chrome  Part No  3725 Industrial Black Part No.   BLK3725 Wrench Opening   1 7⁄16 X 1 7⁄16 Martin hand tools for automotive and industrial use; a great addit...

Current Reviews: 0