Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Paint & Body > Door & Mirror Tools > `The Skinner` Door Panel Installation To

`The Skinner` Door Panel Installation Tool

`The Skinner` Door Panel Installation Tool
"The Skinner" Door Panel Installation Tool - Does not damage outside of door panel!
  • The low cost of this tool is far less than a new replacement door panel. The savings from grinding discs alone, not to mention the time and plastic filler saved, will more than pay for this tool in a very short time.
  • The Skinner will fold the new door panel lip over in one easy operation when used with a 3/8" hand ratchet and 3" extension.
  • This tool floats on a "Teflon" type material, eliminating any outer panel damage.
  • Caulking material can be inserted into the fold before it is flanged, avoiding future rust problems.
  • With the use of this tool, there is no need to use plastic filler on the panel to eliminate hammer and dolly marks.
  • The drive roller is completely adjustable to compensate for the various differences in door skin thickness.
  • Drive roller along with folding rollers are heat treated and built to last a lifetime.
  • The Skinner is made in the U.S.A. and is a true work of art.
Wivco TH.15000 `The Skinner` Door Panel Installation Tool
  • Manufactured by: Wivco Design
  • Toolsource #: 78353
  • Manufacturers Part #: TH15000
  • Also Known As: WITH15000, WIV-TH15.000, WVTTH15000

Only 6 left in stock - order soon

Inventory available from other suppliers, prices may be different


$101.89

Frequently bought together:


Related Products

  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
     Add to Cart  Details 
  • Rocker-Doctor Universal Tie Down & Pull Clamp
    Rocker-Doctor Universal Tie Down & Pull Clamp
    Manufacturers Part #: TH14000
    Your Price: $87.55
    The clamp is made of U.S. Chrome Moly Tool Steel & has a four ton capacity.It will effectively straighten door frames, quarter panels, hoods, fenders, rocker panels, rear decks & sub frames.A new low cost uni-body tie down & pull clamp that will pull sheet metal panels better than any other method, where no access to the back is available & straight line pulling is required.It is a method approved for pulling the new hi-carbon steel box members ...
     Add to Cart  Details 
  • Spot-Eze Spot Weld Remover Kit
    Spot-Eze Spot Weld Remover Kit
    Manufacturers Part #: TH25000
    Your Price: $95.51
    A must for the autobody professional who`s tired of fighting an age-old problem of spot-welds. Features: Speeds up & simplifies a time consuming & troublesome spot weld removal operation on car bodies.An inexpensive compound drill, kit includes four sizes, 5/16 and 3/8 cut diameter in 2" and longer 3" lengths.Simplified construction allows it to resharpen easier than a standard drill.The replaceable center starting drill allows the main drill bo...
     Add to Cart  Details 
  • Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover
    Manufacturers Part #: TH28000
    Your Price: $38.18
    Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
     Add to Cart  Details 

Customers Also Purchased:

  • Spot-Eze Spot Weld Remover Kit
    Spot-Eze Spot Weld Remover Kit
    Manufacturers Part #: TH25000
    Your Price: $95.51
    A must for the autobody professional who`s tired of fighting an age-old problem of spot-welds. Features: Speeds up & simplifies a time consuming & troublesome spot weld removal operation on car bodies.An inexpensive compound drill, kit includes four sizes, 5/16 and 3/8 cut diameter in 2" and longer 3" lengths.Simplified construction allows it to resharpen easier than a standard drill.The replaceable center starting drill allows the main drill bo...
     Add to Cart  Details 
  • Steck 21890 Skin Zipper Door Skinning Tool
    Steck 21890 Skin Zipper Door Skinning Tool
    Manufacturers Part #: 21890
    Your Price: $23.87
    Skin a door in less than 10 minutes! Step One allows the technician to form the edge of the door skin to an initial 45? angle by holding the tool at a right angle to the door. No hammer and dolly work required here. Step Two allows the technician to complete the final form by using the tool at a 45? angle. Two side slot widths are included for thick or thin sheet metal skins. When completed minimal finishing may be required on the corners and bo...
     Add to Cart  Details 

Customers Also Shopped For:

  • 3/8 Inch Square Drive SAE Fractional Extra Long Hex and Ball Hex
    3/8 Inch Square Drive SAE Fractional Extra Long Hex and Ball Hex
    Manufacturers Part #: HXL100
    Your Price: $58.01
    Set includes: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" hex blade drivers; 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" ball hex blade drivers. All hex blades will be S2 steel RC 58/62, black plated  Bit holders CR-V steel, heat treated, bright chrome plated, blades press fit, set screws with thread locker  All drivers are 6" long  Large bold marking for...
     Add to Cart  Details 
  • Spot-Eze Spot Weld Remover Kit
    Spot-Eze Spot Weld Remover Kit
    Manufacturers Part #: TH25000
    Your Price: $95.51
    A must for the autobody professional who`s tired of fighting an age-old problem of spot-welds. Features: Speeds up & simplifies a time consuming & troublesome spot weld removal operation on car bodies.An inexpensive compound drill, kit includes four sizes, 5/16 and 3/8 cut diameter in 2" and longer 3" lengths.Simplified construction allows it to resharpen easier than a standard drill.The replaceable center starting drill allows the main drill bo...
     Add to Cart  Details 
  • Timing Chain Holders
    Timing Chain Holders
    Manufacturers Part #: 10200A
    Your Price: $110.04Includes Free Shipping
    Current Usage * 2011 (JC, JS, LC, LD, LX, RT, WD, WK) - Systems (9 -Engine, 3.6L) 2012 (JC, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2013 (DS, JC, JF, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2014 (DS, JC, JF, JK, JS, KL, LC, LD, LX, RT, VF, WD, WK) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) *To minimize the tools necessary to service Chrysler Group vehicles, this usage infor...
     Add to Cart  Details 
  • Camshaft Phaser Locks
    Camshaft Phaser Locks
    Manufacturers Part #: 10202A
    Your Price: $60.93
    Current Usage * 2011 (JC, JS, LC, LD, LX, RT, WD, WK) - Systems (9 -Engine, 3.6L) 2012 (JC, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2013 (DS, JC, JF, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2014 (DS, JC, JF, JK, JS, KL, LC, LD, LX, RT, VF, WD, WK) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) *To minimize the tools necessary to service Chrysler Group vehicles, this usage infor...
     Add to Cart  Details 
  • Two-Holer Body & Fender Dent Puller Master Shop Kit
    Two-Holer Body & Fender Dent Puller Master Shop Kit
    Manufacturers Part #: TH12000
    Your Price: $179.13Includes Free Shipping
    The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
     Add to Cart  Details 
  • Rocker-Doctor Universal Tie Down & Pull Clamp
    Rocker-Doctor Universal Tie Down & Pull Clamp
    Manufacturers Part #: TH14000
    Your Price: $87.55
    The clamp is made of U.S. Chrome Moly Tool Steel & has a four ton capacity.It will effectively straighten door frames, quarter panels, hoods, fenders, rocker panels, rear decks & sub frames.A new low cost uni-body tie down & pull clamp that will pull sheet metal panels better than any other method, where no access to the back is available & straight line pulling is required.It is a method approved for pulling the new hi-carbon steel box members ...
     Add to Cart  Details 

Current Reviews: 0