Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Spotweld Cutters > 1" Rotabroach Cutt

1" Rotabroach Cutter

1\" Rotabroach Cutter
1" Rotabroach Cutter  11348

  • 1" Rotabroach Cutter.
  • For material up to 1/2" thick.
  • Requires arbor 11007.
  • Made in USA.
Blair Equipment 11348  1" Rotabroach Cutter  


 
  • Manufactured by: Blair Equipment
  • Toolsource #: 139950
  • Manufacturers Part #: 11348
  • Also Known As: BL11348, BLR-11348, BLR11348, BT11348

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different

$25.08

Frequently bought together:


Related Products

  • 3/8" Spot Weld Cutter
    3/8" Spot Weld Cutter
    Manufacturers Part #: 283
    Your Price: $9.65
    Drill out spot welds quickly and completely without cutting into the bottom skin. Leaves a clean hole that requires little or no grinding. The self-centering point prevents "walking". Solid one-piece cutter will stay sharp for hundreds of uses. AES Industries 283 3/8" Spot Weld Cutter AD283...
  • 3/8" Replacement Cutter Set (3 Pack)
    3/8" Replacement Cutter Set (3 Pack)
    Manufacturers Part #: 68750
    Your Price: $20.21
    Replacement Cutters for SPC 68670 Removable Cutter Rotor-Bor: Air drill driven tool made to cut out the spot welds holding the original equipment alignment plate to the top of strut towers. Once the plate is loosened caster and camber can be adjusted. Sold with 3/8" and 5/16" removable cutters. Use SPC "Cool Tool" cutting fluid, 85774, for longer cutter life. CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment....
  • 5/16" Replacement Cutter Set (3 Pack)
    5/16" Replacement Cutter Set (3 Pack)
    Manufacturers Part #: 68780
    Your Price: $20.21
    Replacement Cutters for SPC 68670 Removable Cutter Rotor-Bor: Air drill driven tool made to cut out the spot welds holding the original equipment alignment plate to the top of strut towers. Once the plate is loosened caster and camber can be adjusted. Sold with 3/8" and 5/16" removable cutters. Use SPC "Cool Tool" cutting fluid, 85774, for longer cutter life. CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment....
  • 6.5MM HSCO Spot Weld Drill Bit
    6.5MM HSCO Spot Weld Drill Bit
    Manufacturers Part #: DF-1465
    This bit is our 6.5mm or approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. This German made bit may be used with off brand spot weld drills. Our drill bits are specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. Our German made spo...
  • 3/8" Rotabroach Arbor w/ Pilot Drill
    3/8" Rotabroach Arbor w/ Pilot Drill
    Manufacturers Part #: 11123
    Your Price: $19.67
    3/8" Rotabroach Arbor w/ Pilot Drill  11123 Replacement arbor for Rotabroach Cutters. Fits sizes 3/8" to 3/4". Includes pilot drill and washer. Fits 3/8" or larger drill chucks. Made in USA. Blair Equipment 11123  3/8" Rotabroach Arbor w/ Pilot Drill   ...

Customers Also Purchased:

Customers Also Shopped For:

  • Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Replacement Center Drill for Spot-Eze Spot-Weld Remover - 4 Pk
    Manufacturers Part #: TH25005
    Your Price: $15.88
    Spot-Eze speeds up and simplifies a time-consuming and troublesome spot-weld removal operation on car bodies. It is an inexpensive compound drill, available in four sizes, 5/16" and 3/8" cut diameter, and in a 2" and longer 3" length. Spot-Eze simplified construction allows it to resharpen easier than a standard drill. The replaceable center starting drill allows the main drill body to start quickly and guides the total drill in removing the wel...
  • .3115" Solid Carbide Reamer
    .3115" Solid Carbide Reamer
    Manufacturers Part #: 1151
    Your Price: $406.64Includes Free Shipping
    .3115” Solid Carbide Reamer 1151 These unique reamers feature a 2" long pilot for perfect alignment with the valve guide while reaming. With these reamers you can expect to ream a valve guide to exact dimensions without any taper in just a few seconds. JIMS® Manganese-Bronze valve guide reaming instructions A. Install the cylinder head in a vise. Protect the cylinder head with a clean towel or rag, as pictured. B. Insert the reamer pilo...
  • Auto Rotisserie (No Jacks)
    Auto Rotisserie (No Jacks)
    Manufacturers Part #: M998080
    Your Price: $1,999.00
    If you agree with the "Work Smarter, Not Harder" philosophy, then you owe it to yourself to look at the "Merrick Originals" Auto Rotisserie with E-Z Spin. Merrick's exclusive "spring-loaded locking pin" system means that a single person can safely rotate a well-balanced and secured vehicle. We've engineered a versatile tool that allows you to securely bring your work to the desired height, then rotate it to the best angle for the task at hand. Sa...
  • 1/2 Inch Deluxe Desiccant Dryer System 2 Quart Capacity
    1/2 Inch Deluxe Desiccant Dryer System 2 Quart Capacity
    Manufacturers Part #: 1072-2
    Your Price: $494.30Includes Free Shipping
    Not only dries the compressed air, but also removes dirt and oil. Each factory assembled system consists of the components listed below. Both fi lters are equipped with Milton automatic overnight drains that will drain when the system drops below 5 PSI. Initial supply of desiccant is included. Components: Filter/Regulator Piggyback - 1111Gage - 1191Coalescing Filter - 1037Desiccant Dryer - 1170-2 Manufacturer Drop Ship Milton Industries 1072-2 1/...
  • 8 mm Cobalt Spot Weld Drill Bit
    8 mm Cobalt Spot Weld Drill Bit
    Manufacturers Part #: DF-1780
    Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Dent Fix Equipment DF-1780 8 mm Cobalt Spot Weld Drill Bit DF1780...
  • Boron Cutting Spotweld Cutter
    Boron Cutting Spotweld Cutter
    Manufacturers Part #: 11308
    Your Price: $53.30
    Drill out Boron spotwelds fast with the new Premium Solid Spotweld Cutter. Made from solid carbide for long tool life in today's high strength, extremely hard body panels. Designed for use on UHSS and Boron Steel with self centering and easy cutting action, leaving no damage to underlying panels. Double coated for maximum durability. For use with "gun" type spotweld tools only....

Current Reviews: 0