Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Drive Train- Transmission > Seal Removal & Installation > Axle Bearing and Seal Remov

Axle Bearing and Seal Remover

Axle Bearing and Seal Remover
This special tool is used to remove the axle bearings in Chrysler 8 1/4", 9 1/4" Chrysler Axles, 9 1/4" American Axle, Dana Models 194RBI & 216RBA axles. Also used to remove the transfer shaft seals from 42LE transaxles and 42RLE transmission. Also used on NV1500, NV3500 & NV3550 Manual Transmissions. This tool is also used on Caliber vehicles.

Do not use power tools. Breakage due to use of power tools voids your warranty.
  • Manufactured by: Mopar Essential Tools Miller SPX
  • Toolsource #: 113904
  • Manufacturers Part #: 6310A
  • Also Known As: 6310A

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$313.63

Related Products

  • Breather Reamer Plate Assembly
    Breather Reamer Plate Assembly
    Manufacturers Part #: 1706M
    Your Price: $472.86Includes Free Shipping
    Breather Reamer Plate Assembly 1706M Repair a damaged breather hole with JIMS® Breather Reamer Tool. No need to disassemble the cases. Using JIMS® Reamer Tool will repair a damaged breather hole to use a .030” oversize breather gear (see breather gear section in this catalog), and repair a bad breather hole in less than an hours time (Note: all holes in breather bore will need to be cleared of all chips). Jims USA Jim  1706M&nb...
  • Cam Gear Alignment Tool
    Cam Gear Alignment Tool
    Manufacturers Part #: 1290
    Your Price: $255.62Includes Free Shipping
    Cam Gear Alignment Tool 1290 Use on all Single Cam 1970-99. Use No. 1390 to remove cam gear. This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow you to accurately position and or reposition the cam gear from one camshaft to another, as well as allow you to retard or advance the gear’s position by up to 10 degrees with the accuracy of a 1/4 degree. See 1290-IS for instr...
  • Cam Bushing Reamer Tool
    Cam Bushing Reamer Tool
    Manufacturers Part #: 1023-70
    Your Price: $235.74Includes Free Shipping
    Cam Bushing Reamer Tool 1023-70 Use on all Big Twin 1970-present single cam only. (Note: Includes aftermarket motors.) Use to line ream cam cover bushing to size from inner cam bearing, for a true centerline between the two dimensions. Finish size will be about .0008”-.0015” over the cam journal. Instruction sheet No.1023-IS. JIMS USA JIM  1023-70 Cam Bushing Reamer Tool ...
  • Cam Cover Bushing Remover
    Cam Cover Bushing Remover
    Manufacturers Part #: 2281
    Your Price: $140.03Includes Free Shipping
    Cam Cover Bushing Remover 2281 Use on all Big Twin 1936-69. Use this tool to remove the cam cover bushing. This sturdy and reliable tool will remove the cam cover & cam bushing in one easy operation. Will also remove cam bushing in case. Jims USA JIM 2281 Cam Cover Bushing Remover ...
  • 3" 1/2 Horsepower Reversible Air Cut-off Tool
    3" 1/2 Horsepower Reversible Air Cut-off Tool
    Manufacturers Part #: SX234R
    Your Price: $73.93
    3" 1/2 Horsepower Reversible Air Cut-off Tool SX234R Reversible option to direct sparks and debris away from the user and sensitive work surfaces Hardened rubber grip housing to reduce vibration One year warranty (Includes 3" disc) Replacement discs (set of 5) - 87602 Replacement guard - RS234R32 Maximum Speed (RPM) 18,000 Wheel Size (in.) 3 Weight (lbs.) 2 Length (in.) 8.3 Average Air Consumption (CFM) 3.5 Air Inlet Thread Size (NPTF) 1/4 Min....

Customers Also Purchased:

  • Inner Axle Shaft Seal Installer
    Inner Axle Shaft Seal Installer
    Manufacturers Part #: 8885B
    Your Price: $138.45Includes Free Shipping
    Use this special tool to install the Inner Axle Shaft Seals to their Proper Depth in the new 9 1/4" American Axle. To Current Do not use power tools. Breakage due to use of power tools voids your warranty. Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time. ...
  • Battery & Coolant Tester
    Battery & Coolant Tester
    Manufacturers Part #: J-23688
    Your Price: $225.77Includes Free Shipping
    By placing a few drops of radiator coolant or battery fluid on the instrument and looking into the eye piece a direct reading in degrees of antifreeze protection or battery condition will be obtained.Tests both old and new types of coolant and gives you the accuracy that old bulb style hydrometers cannot. OTC J-23688 Battery & Coolant Tester ...
  • Differential Adjusting Wrench
    Differential Adjusting Wrench
    Manufacturers Part #: 8883B
    Your Price: $52.16
    This special wrench must be used to properly adjust Preload and Backlash on the 9-1/4", 10-1/2" and 11-1/2" American Axles.Thru Current. Current Usage* 2006 (DR) - System (3 - Differential and Driveline) 2007 (DR) - System (3 - Differential and Driveline) 2008 (DR) - System (3 - Differential and Driveline) 2009 (DH) - System (3 - Differential and Driveline) 2010 (DC, DS) - System (3 - Differential and Driveline) 2011 (DS) - System (3 - Different...

Customers Also Shopped For:

  • Seal Remover
    Seal Remover
    Manufacturers Part #: 7920
    *this item has been discontinued
    Seal Remover  7920 Used on Jeep #30 front axles. 1987 thru 1991 Included in 6288 kit Do not use power tools. Breakage due to use of power tools voids your warranty. SPX Special Miller Tools  7920 Seal Remover  ...
  • Tap Tap & Drill Bit Set - National Course - 18-Pc
    Tap Tap & Drill Bit Set - National Course - 18-Pc
    Manufacturers Part #: KK18TDNC
    Your Price: $168.77Includes Free Shipping
    This item may not be in stock; please email service@toolsource.com for lead time. Features: Premium grade KnKut Drills are manufactured from a high grade M-7 Molybdenum high speed steel, that has a high vanadium content. KnKut Performance Drills are salt nitride treated, actually penetrating the tool's surface giving KnKut Drills the hardness to drill tough materials such as stainless steel and titanium alloy. KnKut Performance Taps give you qui...
  • Pitman Arm Puller T64P-3590-F 7311
    Pitman Arm Puller T64P-3590-F 7311
    Manufacturers Part #: 7311A
    Your Price: $58.11
    Supersedes OTC7311 Adjustable with special replaceable forged jaws.Two clamp bolts lock jaws on Pitman arm.Can perform other pulling jobs.Services cars and light trucks to 3/4-ton.Weight: 3.4 lbs.Same as Ford No. T64P-3590-F. OTC 7311A Pitman Arm Puller for Passenger Cars and Light trucks to 3/4-ton ...
  • Seal Installer (2pk)
    Seal Installer (2pk)
    Manufacturers Part #: 8110A
    Your Price: $50.23
    Seal Installer (2pk)  8110 Use these disks with the 6764 installer to install the inner axle seals on Dana models 30, 181FBI, 186FBI & 216FBI front Non-Disconnect type axles. 1997 thru current Current Usage* 2006 (TJ) - System (3 - Differential and Driveline) 2007 (JK) - System (3 - Differential and Driveline) 2008 (J8, JK) - System (3 - Differential and Driveline) 2009 (J8, JK) - System (3 - Differential and Driveline) ...
  • Left-Handed Die - 9/16 x 18
    Left-Handed Die - 9/16 x 18
    Manufacturers Part #: 7749
    Your Price: $23.64
    High Carbon Steel Rethreading Die - Left Hand 9/16 x 18 NF Image shows Hanson p/n 7720 ...
  • Axle Seal Installer
    Axle Seal Installer
    Manufacturers Part #: 5041A
    Your Price: $114.34Includes Free Shipping
    Use this tool to install front axle seals into Dana #44 and 60 disconnect axles to their proper depth. Also used with Miller P/N 8411, 8415, 8416 and 8834. 1988 thru 2002. Replacement parts include 5041-1 Installer, 5041-2 Forcing Screw and 5041-3 Disc, also available separately. Manufacturer drop ship; please email service@toolsource.com for lead time. SPX Miller Special Tools Mopar 5041 Axle Seal Installer ...

Current Reviews: 0