Ridge Reamers
As an engine wears, the piston rings wear the cylinder wall below the top of their travel, leaving a ridge of unworn metal and carbon at the top of the bore. A ridge reamer trims that ridge flush so the pistons and rings slide out the top without breaking ring lands or scoring the bore. This category holds adjustable ridge reamers that cover a range of bore sizes, replacement carbide cutters and expander bands.
How a ridge reamer is used
The reamer is set into the top of the cylinder, expanded until the cutter bears on the ridge, and turned by hand with a wrench. The cutter is fed in a little at a time and the work stops once the ridge is flush with the worn wall, since cutting deeper only removes good metal.
Engine rebuilders, machine shops and technicians doing overhauls use them. Brands here include Lisle, K Tool, General Tools and Cal-Van.








































Follow us on social media