Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Paint & Body > Pullers > Pulling Clamps > Dyna-Mo W Cla

Dyna-Mo W Clamp

Dyna-Mo W Clamp
  • Self-tightening.
  • Wider tooth surface to grab more thin metal without tearing.
  • Drop-forged round wedge to keep twist out of chain.
  • Aggressive cross-hatch tooth design.
  • Gripping surface: 2 1/4" wide (57 mm), 1 3/4" deep (45mm).
  • Overall length: 7" (178 mm).
  • Weight: 3 lbs. (1.36 kg).
  • Capacity: 3 tons (2,722 kg).
Mo-Clamp 0405 Dyna-Mo™ W Clamp
  • Shipping Weight: 2.4lbs
  • Manufactured by: Mo-Clamp
  • Toolsource #: 64517
  • Manufacturers Part #: 0405
  • Also Known As: MCL-0405, PU0405

Only 9 left in stock - order soon

$96.82

Frequently bought together:

  • Add this item to your cart and save $11.73 when purchased with the product above.
    Discount applied at checkout.
  • Add this item to your cart and save $14.52 when purchased with the product above.
    Discount applied at checkout.


Customers Also Purchased:

  • Dyna-Mo Jr Clamp
    Dyna-Mo Jr Clamp
    Manufacturers Part #: 0305
    Your Price: $78.17
    Self-tightening Thin-edged nose for getting into hard-to-reach places Drop-forged round wedge to keep twist out of chain Aggressive cross-hatch tooth design, spring-loaded for easy opening Gripping surface: 1 1/4" wide (32 mm), 1" deep (25 mm) Overall length: 7" (178 mm) Weight: 2 lbs. (.91 kg)Capacity: 3 ton (2,722kg) Mo-Clamp 0305 Dyna-Mo™ Jr Clamp ...
  • Portable Masker - 18 Inch
    Portable Masker - 18 Inch
    Manufacturers Part #: 78002
    Your Price: $49.13
    This portable paper masker requires no tools to load the paper.  Saves time and loads paper quickly and easily! Lightweight, uses very little floor space. Holds up to an 18" roll of paper.Three widths to hold popular sizes of paperLightweight - Uses very little floor spaceUse "Add-A-Roll-Kit" for two rolls of smaller paper8" Diameter roll will fitMade in USA. Keysco 78002 18" Portable Masker ...
  • Super Scraper
    Super Scraper
    Manufacturers Part #: 71510
    Your Price: $10.37
    Super Scraper - Works Like a Chisel! One piece composite construction can be hit with a hammer.Removes emblems, body side moldings and stick-on wheel weights. Scrape off stickers without scratching paint or glass.Resharpen when needed with a file. Steck 71510 Super Scraper ...
  • Master Upholstery Tool Set - 5-Pc
    Master Upholstery Tool Set - 5-Pc
    Manufacturers Part #: DT6200
    Your Price: $43.15
    This new 5-pc set features a new state of the art design includes door panel tools that will handle all styles of clips.The small trim and tack tools are designed to remove trim, molding, emblems, or any small prying jobs. Also included is a hinge side door panel removal tool.High polished stainless steel heat treated blades are rigid & easy to clean.Lifetime warranty. Vim Tools DT6200 Master Upholstery Tool Set - 5-Pc ...
  • Seam Buster Spot Weld Chisel STC20015SB
    Seam Buster Spot Weld Chisel STC20015SB
    Manufacturers Part #: 20015
    Your Price: $26.31
    Easily separate spot welded or bonded panels Sharpened on two edges. The sharp end allows for penetration between the panels and the side edge allows for side impact to drive the panels apart without damage. Super tough alloy steel. Cushioned handle absorbs shock. Chisel tip for starting seam separation Chisel edge for easily moving along seam Save up to 15 minutes per panel replacement For quarter panels, rockers and any other pinchweld Steck 2...
  • Handy Bar
    Handy Bar
    Manufacturers Part #: 20012
    Your Price: $11.97
    Uniquely designed durable, non-marring tool with a chisel end that allows the technician to repair body lines in sheet metal without scrapping off rust protective coatings as well as longer flat surfaces to allow technicians to spring panels and pound out high spots in sheet metal.Saves technicians up to an hour - no need to reapply rust protective coatings on panels. Steck 20012 Handy Bar ...

Customers Also Shopped For:

  • Seam Buster Spot Weld Chisel STC20015SB
    Seam Buster Spot Weld Chisel STC20015SB
    Manufacturers Part #: 20015
    Your Price: $26.31
    Easily separate spot welded or bonded panels Sharpened on two edges. The sharp end allows for penetration between the panels and the side edge allows for side impact to drive the panels apart without damage. Super tough alloy steel. Cushioned handle absorbs shock. Chisel tip for starting seam separation Chisel edge for easily moving along seam Save up to 15 minutes per panel replacement For quarter panels, rockers and any other pinchweld Steck 2...
  • Dyna-Mo C Clamp
    Dyna-Mo C Clamp
    Manufacturers Part #: 0205
    Your Price: $78.17
    Self-tightening Great for getting over lips or edges Drop-forged round wedge to keep the twist out of chainCross-hatch tooth design, spring-loaded for easy opening Gripping surface: 1 1/4" wide (32 mm), 1/2" deep (13 mm) Overall length: 7" (178 mm) Weight: 2 lbs. (.91 kg) Capacity: 3 tons (2,722 kg) Mo-Clamp 0205 Dyna-Mo C Clamp ...
  • Computer Trouble Code Access Tool
    Computer Trouble Code Access Tool
    Manufacturers Part #: 378
    Your Price: $19.98
    Computer Trouble Code Access Tool Quick easy access to trouble codes. Speeds diagnosis of engine problems Convenient tool for servicing vehicles with computer controlled engines, including GM CCC and C-4; Ford MCU and EEC-IV; and AMC Alliance CEC systems. Access Tool has mistake proof molded plugs that match diagnostic connectors. Will not damage computers. Comes complete with instructions. ...
  • 1/2 Inch Drive 6 Pt Deep Impact Socket 1-7/16 Inch
    1/2 Inch Drive 6 Pt Deep Impact Socket 1-7/16 Inch
    Manufacturers Part #: 246D
    Your Price: $13.00
    Forged from the finest chrome Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. Sunex 246D 1/2" Drive 6 Point Deep Impact Socket 1-7/16" ...
  • 3/8 In Drive 12 Pt Deep Metric Socket - 9mm
    3/8 In Drive 12 Pt Deep Metric Socket - 9mm
    Manufacturers Part #: 8429
    3/8 In Drive 12 Pt Deep Metric Socket - 9mm Specifications: Size - 9mm Diameter - 0.69" Length - 1.75" Caution: Do not use chrome sockets or drive tools with impact or power tools. Such use damages the tool, and may also result in bodily injury. ...
  • Hendrickson Service Set w Hydraulics
    Hendrickson Service Set w Hydraulics
    Manufacturers Part #: 1741
    Your Price: $10,641.07
    Non-stock item, back order status; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed. Features: Hendrickson Service Set For 340 - 450 series Hendrickson suspensions.The method Hendrickson recommends for suspension service.Tooling for hanger tube or end plug adapter removal not included.Made in U.S.A.Weight: 285 lbs. S...

Current Reviews: 0