Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Exhaust & Muffler > Oxygen Sensor Thread Repair > Oxygen Sensor Thread Chaser - M18 x 1

Oxygen Sensor Thread Chaser - M18 x 1.5

Oxygen Sensor Thread Chaser - M18 x 1.5
Lisle 12230 Oxygen Sensor Thread Chaser Features:
  • Cleans threads in Oxygen Sensor holes.
  • Use with 3/4" hex socket or 3/8" square dirve.
  • Size: M18 x 1.5
  • Also works on M18 x 1.5 spark plug threads.
  • Important: Use anti-seize.
  • Shipping weight: 3 oz.
Lisle 12230 Oxygen Sensor Thread Chaser
  • Shipping Weight: 0.16lbs
  • Manufactured by: Lisle
  • Toolsource #: 97038
  • Manufacturers Part #: 12230
  • Also Known As: LI12230, LIS-12230, LIS12230, LS12230

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different


List Price: $6.00
You save: $1.77
$4.23

Frequently bought together:



Customers Also Purchased:

  • Limited Access Spark Plug Chaser - M14 x 1.25
    Limited Access Spark Plug Chaser - M14 x 1.25
    Manufacturers Part #: 20020
    Your Price: $9.06
    Fits spark plug holes with limited access.The narrow profile and long length allows access to spark plug holes in confined spaces.Use with a 3/8" ratchet or extension.Size: M14 x 1.25 Important: Use anti-seize.Shipping weight: 3 oz. Lisle 20020 Limited Access Spark Plug Chaser ...
     Add to Cart  Details 
  • Transmission Oil Cooler Line Disconnect Tool Set - Ford, Cadilla
    Transmission Oil Cooler Line Disconnect Tool Set - Ford, Cadilla
    Manufacturers Part #: 39960
    Your Price: $9.26
    Two sizes, 3/8" and 1/2", are designed to disconnect transmission cooler lines. Use 3/8" size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS. Use 1/2" size for Ford Super Duty Trucks, F250, F350 and F450. Tip is specially stepped to fit connector. Simply push the line toward the connector, then engage tool and pull line from conector. Set comes skin packed. Shipping weight: 1 oz. Lisle 39960 2-Pc Transmission Oil C...
     Add to Cart  Details 
  • 7/8 In Oxygen Sensor Socket
    7/8 In Oxygen Sensor Socket
    Manufacturers Part #: 12100
    Your Price: $10.80
    Removes & installs oxygen sensors on most domestic & some imports.Special 7/8" socket w/ cutaway slot to provide clearance for wire harness.Provides adequate depth to fit over sensor.Heat treated alloy steel.Use w/ 3/8" square drive or 1" wrench.Shipping weight 9 oz. Lisle 12100 7/8" Oxygen Sensor Socket ...
     Add to Cart  Details 
  • Shielded Oxygen and Fuel Sensor Socket
    Shielded Oxygen and Fuel Sensor Socket
    Manufacturers Part #: 66750B
    Your Price: $33.03
      This unique tool has been designed to R&R "CAN" type shielded oxygen sensors and air fuel sensors currently found on later models vehicles. The depth and outer diameter of the socket are critical features enabling it to fit in the limited space of the heat shield. For maximum strength this 6 point tool is forged steel and comes in the SP High Tech black finish. The "B" model will work on all oxygen and air fuel sensors that are shield...
     Add to Cart  Details 
  • Oxygen Sensor Thread Repair Kit HEL4833
    Oxygen Sensor Thread Repair Kit HEL4833
    Manufacturers Part #: 4833
    Your Price: $150.25
    Quickly and permanently restore damaged M18 x 1.5 oxygen sensor threads in exhaust manifold.Piloted reamer tap - no drilling necessary and perfect alignment of new hole.Corrosion resistant stainless steel inserts.Perfect for the professional engine rebuilder or do it yourselfer.Eliminates exhaust manifold replacement. Contents: (1) 1030-18-2 Pilot Reamer Tap(1) 4973-18 Installation Tool(12) R514-11 M18x1.5 Inserts Heli Coil 4833 Oxygen Sensor Th...
     Add to Cart  Details 
  • Heated Oxygen Sensor Wrench T94P-9472-A
    Heated Oxygen Sensor Wrench T94P-9472-A
    Manufacturers Part #: 7807
    Your Price: $55.77
    A slot was designed in the side of this wrench to accommodate connectors on heated oxygen sensors that are too large to fit through standard 02 sensor wrenches. The extended and reinforced design removes the toughest sensors without rounding them off. Has a 1/2" double square drive. Similar to Ford T94P-9472-A.Wt., 8 oz. OTC 7807 Heated Oxygen Sensor Wrench ...
     Add to Cart  Details 

Customers Also Shopped For:

  • Oxygen Sensor Thread Repair Kit HEL4833
    Oxygen Sensor Thread Repair Kit HEL4833
    Manufacturers Part #: 4833
    Your Price: $150.25
    Quickly and permanently restore damaged M18 x 1.5 oxygen sensor threads in exhaust manifold.Piloted reamer tap - no drilling necessary and perfect alignment of new hole.Corrosion resistant stainless steel inserts.Perfect for the professional engine rebuilder or do it yourselfer.Eliminates exhaust manifold replacement. Contents: (1) 1030-18-2 Pilot Reamer Tap(1) 4973-18 Installation Tool(12) R514-11 M18x1.5 Inserts Heli Coil 4833 Oxygen Sensor Th...
     Add to Cart  Details 
  • 3/8 In Dr 12-Pt Std/Deep Fractional & Metric Duo-Socket Set - 59
    3/8 In Dr 12-Pt Std/Deep Fractional & Metric Duo-Socket Set - 59
    Manufacturers Part #: 81259CRD
    Your Price: $217.29
    Grey Pneumatic 81259CRD 3/8" Drive 12-Point Standard & Deep Length Fractional & Metric Duo-Socket Set contains all standard and deep length 12 point sockets in both fractional and metric sizes, plus a 72 tooth quick release ratchet and two extensions.Fractional sizes 5/16" to 1" and metric sizes 7mm to 22mm. 59 piece set includes: 12 Pieces Standard Length: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"12 Pieces Dee...
     Add to Cart  Details 
  • Brake Spring Pliers
    Brake Spring Pliers
    Manufacturers Part #: 989
    Your Price: $38.43
    The V8 989 Brake Spring Pliers makes brake jobs fast and easy and offers more grip and control than ever before. Brake spring removal and installation is always a tough job. V8 Tools has improved this tool by making it longer, with slightly wider and stronger tips that can hold the spring better without leaving a deep cutting mark.Also includes end cutters. V8 Tools 989 Brake Spring Pliers ...
     Add to Cart  Details 
  • Roll-A-Round Base
    Roll-A-Round Base
    Manufacturers Part #: 80895
    Your Price: $176.49
    Standard roll-around caster base used on 613, 624 and 3644.For use with 16 gallon (120 lb.) refinery containers.Complete with four ball-bearing swivel casters and screw clamps. Manufacturer drop ship; please email service@toolsource.com for lead time. Lincoln Industrial 80895 Roll A-Round Base ...
     Add to Cart  Details 
  • Fractional SAE 12 Pt Black Oxide Combination Wrench Set 15 Pc
    Fractional SAE 12 Pt Black Oxide Combination Wrench Set 15 Pc
    Manufacturers Part #: 36255
    Black Oxide 12 Pt Combo Wrench Set Contains: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1"Wrench RackWhile supplies last, buy SK 36255 or SK 36265 and receive a FREE Pair of XL M-Pact Gloves Image shows SK 36265 SK Hand Tool 36255 15 Piece Fractional SAE 12 Point Black Oxide Combination Wrench Set ...
     Add to Cart  Details 
  • Transmission Oil Cooler Line Disconnect Tool Set - Ford, Cadilla
    Transmission Oil Cooler Line Disconnect Tool Set - Ford, Cadilla
    Manufacturers Part #: 39960
    Your Price: $9.26
    Two sizes, 3/8" and 1/2", are designed to disconnect transmission cooler lines. Use 3/8" size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS. Use 1/2" size for Ford Super Duty Trucks, F250, F350 and F450. Tip is specially stepped to fit connector. Simply push the line toward the connector, then engage tool and pull line from conector. Set comes skin packed. Shipping weight: 1 oz. Lisle 39960 2-Pc Transmission Oil C...
     Add to Cart  Details 

Current Reviews: 0