Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Misc > Main Bearing Cap Remov

Main Bearing Cap Remover

Main Bearing Cap Remover
Corvette V8s (both 7.0L and Supercharged 6.2L) have a unique main bearing cap bolt spacing, and currently Essential J-41818 will not fit. EN-49102 fits both the new and current spacing, and will back-service all Gen V8 (4.8L, 5.3L, 5.7L, 6.0L, 6.2L, 7.0L) to 1997, replacing J-41818. The legs of EN-49102 are inserted into the main bearing cap, and tightened into the cap bores. A slide hammer (J-23907-1) is attached to EN-49102 and used to remove the cap from the block. The bearing cap must be removed straight away from the crankshaft to prevent damage to the crankshaft, the block, or the cap itself.

Kent-Moore Tools EN-49102 Main Bearing Cap Remover
  • Manufactured by: Kent-Moore
  • Toolsource #: 130837
  • Manufacturers Part #: EN-49102
  • Also Known As: KMEN49102

Only 1 left in stock - order soon


Related Products

Customers Also Shopped For:

  • 5th Gear Locknut Wrench - Output Shaft
    5th Gear Locknut Wrench - Output Shaft
    Manufacturers Part #: 6443
    Your Price: $164.92Includes Free Shipping
    Use this special wrench to remove and install the 5th gear locknut on the output shaft in 2 & 4 wheel drive vehicles equipped with the NV4500 manual transmission. 1992 thru 1994 Do not use power tools. Breakage due to use of power tools voids your warranty. SPX Miller Special Tools Mopar 6443 5th Gear Locknut Wrench - Output Shaft ...
  • Battery Cable Cutter - 2 In Capacity
    Battery Cable Cutter - 2 In Capacity
    Manufacturers Part #: 15032
    Battery Cable Cutter - 2 In Capacity For use on copper wire only.2 In cable capacity.Made in the USA....
  • 8802-7 Alligator Ergo Grip Water Pump Pliers 88 02 180 Comfort H
    8802-7 Alligator Ergo Grip Water Pump Pliers 88 02 180 Comfort H
    Manufacturers Part #: 8802180
    Your Price: $28.28
    Box-joint design: high stability because of double guide.Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required.Guard prevents operators? fingers being pinched.Favourable lever action: optimum transmission of force.Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and secure gripping.Chrome Vanadium electric steel, oil-hardened and tempered.New Maximum Capacity = 1 1/2"New Adj...
  • z-nla Telescoping Mirror - 2.25 In Diameter
    z-nla Telescoping Mirror - 2.25 In Diameter
    Manufacturers Part #: 90311
    Inspection mirrors let you see over, under and around tight spots.Stainless steel telescoping handle is strong, long and lightweight.Comfortable textured cushion grip keeps handle secure even in wet or oily hands.Made in the U.S.A6-1/2" to 36-3/8"2.25 DiameterImage shows both SK 90311 (2.25" diameter) and 90312 (3.25" diameter) mirrors. SK Hand Tool 90311 Telescoping Mirror, 2.25" Diameter ...
  • Cummins Fuel Rail Wrench - 24mm
    Cummins Fuel Rail Wrench - 24mm
    Manufacturers Part #: 66150
    Your Price: $35.28
    This special 24 mm flare nut type wrench will slide back into the recessed area of the cylinder head where the fuel line retainer screws into the head. Without this special depth and angles flare jut wrench, you cannot hold the 24 mm retainer in place while you loosen the 19 mm coupler to the high-pressure fuel lines. Features: This tool is special for the Cummins common fuel rail set up on the 5.9L motors 2003 and later.This Cummins 5.9L diesel ...
  • Engine Lift Bracket H2
    Engine Lift Bracket H2
    Manufacturers Part #: J-41798
    Your Price: $426.29Includes Free Shipping
    Applications: H2 F, Y CAR For appearance reasons, the brackets used to install the engine in the chassis of the 1998 F-car are removed at the factory. To avoid component damage when lifting the engine, special shaped brackets are required. Two brackets are attached to the cylinder heads with bolts included with the tool. One is attached to the front left; the other at the right rear of the engine. A jib crane and chains are hooked into the brack...

Current Reviews: 0