GAGE 1/8" NPT CENTER BACK

$GAGE 1/8\" NPT CENTER BACK$

Gage 1/8" NPT, 0-60 PSI

Shipping Weight: 0.14lbs
Manufactured by: Milton Industries
Toolsource #: 236551
Manufacturers Part #: 1188
Also Known As: MIL1188

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

List Price: $17.24
You save: $0.20

$17.04

Customers Also Shopped For:

Flex Head GearWrench Completer Set - SAE - 4-Pc

Manufacturers Part #: 9703
Your Price: $114.64Includes Free Shipping
Completer set for 9701 GearWrench Flex Head Ratcheting Wrench Set.Includes 13/16", 7/8", 15/16", and 1" sizes in a 13 pc rack.13 piece rack - extra storage for existing 5/16" - 3/4" GearWrench Flex Head Ratcheting Wrenches.Adjustable set screw - sets desired head tension.Surface Drive on open end - elimates fastener rounding.Serrated beam works as directional assistant. KD Tools 9703 4-Pc SAE Flex Head GearWrench Completer Set ...
Add to Cart Details
B7946 PORTABLE WIRE CRIMP TOOL

Manufacturers Part #: B7946
Your Price: $56.23
3 point Crimper No need for pricey long handle crimping tools and replacement jaws. This tool does a 3 point crimp all at one time and it crimps up to 4awg cables! Tight work areas are not a problem for this small hand held crimper. Can be held with a 3/8” drive extension or ratchet as well as a 19mm or ¾ inch open end wrench. Can be used with a 3/8” impact battery drill for heavy duty wire up to 4 gauge. Convenient 3/8" drive holding fixtur...
Add to Cart Details
Valve Guide Remover

Manufacturers Part #: J-36019-A
Your Price: $86.39
Kent-Moore Tools J-36019-A Valve Guide Remover ...
Add to Cart Details
HCS Cut Thread Fractional Taper Tap - 1 In - 12 NF

Manufacturers Part #: 1366
Your Price: $19.49
High Carbon Steel Cut Thread Fractional Taper Tap - 1" - 12 NF (National Fine) Designed and manufactured to handle the most difficult hand tapping applications.Highly polished flutes aid in chip removal.Taps produce a class 2B thread.Made in USA. ...
Add to Cart Details
Gage 1/4 Inch NPT, 0-100 PSI

Manufacturers Part #: 1174-7
Your Price: $10.87
This item may not be in stock; please email service@toolsource.com for lead time. Milton 1174-7 Gage 1/4" NPT, 0-100 PSI ...
Add to Cart Details
1/2" Compact Desiccant Dryer - 1 Qt

Manufacturers Part #: 1170
Your Price: $160.33Includes Free Shipping
Delivers extremely dry compressed air as low as -30? F dew point without using electricity or refrigerant. Easy to monitor, when color changes in the sight glass from dark blue to pink, then it is time to change or dry the desiccant. To dry desiccant, remove from unit, bake at 275? F for 3 hours. To prolong the life of the unit, a 40 micron pre-filter, and .03 coalescing filter should precede dryer. Initial supply of desiccant is included. How de...
Add to Cart Details