What's the difference between standard and deep sockets, and when would I use each?

Standard sockets are shorter, making them suitable for accessing fasteners in open areas. Deep sockets, like those found in the Sunex Tools 1/2 Inch Drive Metric Deep and Shallow Impact Socket Set, are longer and designed to reach recessed fasteners or those on long bolts. Choose deep sockets when you need extra reach, but be mindful of clearance issues in tight spaces where a standard socket might be a better fit.

What is an impact socket, and why can't I just use a regular socket with an impact wrench?

Impact sockets, such as those from Grey Pneumatic, are specifically designed to withstand the high torque and impact forces generated by impact wrenches. They are made from a tougher alloy steel (typically chrome-molybdenum) and are thicker to prevent shattering. Using a regular (chrome-vanadium) socket on an impact wrench can be dangerous, as it may crack or break under the stress, potentially causing injury or damage to the tool or workpiece.

What does '1/2 inch drive' mean, and how do I know what drive size I need?

The 'drive size' refers to the size of the square opening on the socket that connects to the drive tool (ratchet, impact wrench, etc.). A 1/2 inch drive socket, like those in the Ingersoll Rand 1/2 Inch Drive Metric Impact Socket Set, fits onto a 1/2 inch drive tool. The appropriate drive size depends on the size and torque requirements of the fasteners you're working with. Larger fasteners generally require larger drive sizes for increased torque capacity.

What are the benefits of a 6-point socket versus a 12-point socket?

6-point sockets grip the fastener on its flat sides, providing a more secure hold and reducing the risk of rounding off the corners, especially on stubborn or corroded fasteners. 12-point sockets offer twice as many engagement points, allowing for easier placement on the fastener, particularly in tight spaces. However, they are more prone to slipping and rounding off fasteners under high torque. For impact applications, 6-point sockets, like those found in the Grey Pneumatic 1326MD, are generally preferred due to their superior grip and strength.

What are wheel protector impact sockets, and when should I use them?

Wheel protector impact sockets, such as the GearWrench 3 Pc 1/2" Drive High-Strength Wheel Protector Impact Metric Set, have a plastic sleeve around the socket to prevent scratching or damaging delicate wheel finishes when removing or installing lug nuts. They are essential for working on alloy or painted wheels to maintain their appearance. Always ensure the socket size matches the lug nut size precisely to avoid damaging either the nut or the wheel.

How do I choose the right size metric socket?

Metric sockets are sized in millimeters (mm). The correct size socket should fit snugly on the fastener head without excessive play. If the socket is too small, it won't fit; if it's too large, it can round off the fastener. It's always best to have a comprehensive set, like the Sunex Tools 1/2 Inch Drive Metric Deep and Shallow Impact Socket Set 40 Pc, to cover a wide range of fastener sizes. Consider using a caliper to measure the fastener head if the size is not readily apparent.

What is the difference between shallow and deep impact sockets?

Shallow impact sockets are designed for general use where access to the fastener is unobstructed. Deep impact sockets, on the other hand, are longer and allow you to reach fasteners that are recessed or located at the end of long bolts or studs. A set like the Sunex Tools 1/2 Inch Drive Metric Deep and Shallow Impact Socket Set provides both types, offering versatility for various applications.

What is the best way to care for and store my metric socket set?

To prolong the life of your metric socket set, keep them clean and dry to prevent rust. Wipe down sockets after each use, especially if they've been exposed to moisture or corrosive substances. Store your sockets in a designated case or organizer, like the blow-molded case often included with sets such as the Ingersoll Rand 1/2 Inch Drive Metric Impact Socket Set, to protect them from damage and keep them organized. Applying a light coat of oil periodically can also help prevent corrosion.

Search

Manufacturers [more]

Grey Pneumatic | 1512DM | 1/2 In Dr Deep Fractional & Metric 6 Pt Impact Socket Set - 30-P

Name: 1/2 In Dr Deep Fractional & Metric 6 Pt Impact Socket Set - 30-P
Brand: Grey Pneumatic
SKU: 106518
Price: 189.51 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Set contains 6-Point Fractional sizes 7/16'' to 1-1/4'' and metric sizes 10mm to 27mm in deep length, plus two flip sockets and 3'' extension for wheel service.

High quality chro-moly alloy steel.

GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.

Set weight: 18 lbs.

Lifetime Warranty.

Includes:

13 Pieces Fractional Deep Length
- 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4"
14 Pieces Metric Deep Length
- 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm , 18mm, 19mm, 21mm, 22mm, 26mm, 27mm
Flip Sockets
- 3/4'' x 13/16'' , 19mm x 21mm

Grey Pneumatic 1512DM 1/2'' Drive Deep Length Fractional & Metric Impact Socket Set - 30-Pc