Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Electrical Systems > Leads and Probes > XEL Test Hook - 48 In w/ Shrouded R Angle Banana Plu

XEL Test Hook - 48 In w/ Shrouded R Angle Banana Plugs

XEL Test Hook - 48 In w/ Shrouded R Angle Banana Plugs
XEL Test Hook - 48" w/ Shrouded Right Angle Banana Plugs
  • Heavy-duty test hook with insulation piercing needle and superior ergonomic tip design for easy separation of bundled wire.
  • The V shaped grove in the tip centers various gauge wire for positive contact every time.
  • Banana socket in handle accepts both shrouded and standard banana plugs.
  • Shrouded Banana Plug 9302: Nickel-plated brass body, Nickel-plated Phosphor Bronze springs, plastic handle, solderless assembly.
    • Fits most Fluke and B&K Precision Instruments.
    • Lead length: 48" / 120cm
    • Set of 1 Red & 1 Black
    • Shipping Weight: 0.25lbs
    • Manufactured by: EZ Hook
    • Toolsource #: 73744
    • Manufacturers Part #: 633XEL48RB
    • Also Known As: EZH633XEL48RB

    Special Order
    Contact For Details

    $28.93

    Related Products


    Customers Also Purchased:

    • Hood/Tailgate Prop - Universal
      Hood/Tailgate Prop - Universal
      Manufacturers Part #: 430
      Your Price: $10.50
      Universal Hood/Tailgate Prop Fits vehicles with weak gas cylinder lifts on hoods, tailgates and trunks.Securely attaches to lift rod and holds hood, trunk or tailgate in place.Allows the user access under the hood or rear luggage area without the use of clumsy props or sticks that limit the working area.Eliminates the chance of bumping prop rods and having hood or trunk close.Can be used to change lifts on vehicles with 2 lifts holding hood/tail...
    • Hood Prop
      Hood Prop
      Manufacturers Part #: 45900
      Your Price: $28.42
      The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. The tool telescopes from 18 1/2in to 46 3/4in. Can be used from the side of car for better access to the engine compartment. Also great for body or repair work on door, trunk lids, or hatchbacks. ...
    • Calibrated Ignition Tester - High-Energy Systems
      Calibrated Ignition Tester - High-Energy Systems
      Manufacturers Part #: 2756
      Your Price: $8.73
      Features: Accurately check for spark in ignition systems without removing spark plug from engine.Tester verifies that energy is sufficient for spark plug to fire.Attach spark plug wire to tester end. Clamp tester to engine as ground. Crank engine and check for spark.KD 2756 HEI Igntion Tester is calibrated for High-Energy Systems, while KD 2757 Standard Ignition Tester is calibrated for Standard Ignition Systems. Caution: Wear eye protection. KD...
    • Innovative Products of America IPA 7880 Top Dead Center Indicato
      Innovative Products of America IPA 7880 Top Dead Center Indicato
      Manufacturers Part #: 7880
      Your Price: $22.36
      The TDC Indicator allows a technician to accurately set any position to Top Dead Center.Remove spark plug, screw in the gauge and rotate the engine observing the graduation marks on the sliding shaft. Note the top piston stroke.Accurately displays piston movement.1/8" graduation marks. Installs as easy as a spark plug.Made of 1144 steel.Stainless Steel spring.Lifetime warranty.Made in the U.S.A. Innovative Products of America 7880 Top Dead Cente...
    • Brake Resetting Gauge
      Brake Resetting Gauge
      Manufacturers Part #: 3377
      Your Price: $43.72
      Features: Use gauge to set the proper clearance between brake lining and drum from 6 1/2" to 14 1/4" (160 to 360mm) in diameter.Inside calipers measure drum diameters and outside calipers transfer measurement to brake shoes.Knurled knob locks tool at measurement.It is calibrated in 1/64" increments. KD Tools 3377 Brake Resetting Gauge ...
    • Inlet Fittings For R-12/R-134a 15400/15600 Series Pumps
      Inlet Fittings For R-12/R-134a 15400/15600 Series Pumps
      Manufacturers Part #: 15495
      Your Price: $45.00
      Convert your pump to R-12 and R-134a. Solid brass "tees" replace inlet fittings on pump; includes a branch with a 1/4" MFL fitting for R-12 (and other refrigerants) and a branch with 1/2" Acme fitting for R-134a. Combination Inlet Fitting for 15400/15600 series vacuum pumps. Robinair 15495 Inlet Fittings For R-12/R-134a 15400/15600 Series Pumps ...

    Customers Also Shopped For:


    Current Reviews: 0