Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Shop Safety and Apparel > Kneepads - Aprons > Mechanics Knee Pa

Mechanics Knee Pads

Mechanics Knee Pads
Mechanics Knee Pads
  • Thick foam padding takes the pain out of kneeling on hard surfaces.
  • Lightweight and flexible.
  • These knee pads provide comfort in a durable construction.
    • Shipping Weight: 0.4lbs
    • Manufactured by: S & G Tool Aid
    • Toolsource #: 58374
    • Manufacturers Part #: 14700
    • Also Known As: SG14700, SGT-14700, SGT14700, TA14700

    Only 1 left in stock - order soon

    Inventory available from other suppliers, prices may be different

    $19.47

    Customers Also Purchased:

    • 1/4 In Drive 12 Pt Standard Metric Socket - 8mm
      1/4 In Drive 12 Pt Standard Metric Socket - 8mm
      Manufacturers Part #: 43707
      Your Price: $11.84
      1/4 In Drive 12 Pt Standard Metric Socket - 8mm Made in the U.S.A., featuring quality workmanship and value. The patented SureGrip(R) hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. High polish SuperKrome(R) plating results in a jewelry-like finish, providing long life and ...
    • Supreno SE Powder-Free Nitrile Gloves - X-Large
      Supreno SE Powder-Free Nitrile Gloves - X-Large
      Manufacturers Part #: SU690XL
      Your Price: $16.48
      100 per box. Soft and durable nitrile formulation for improved elasticity and greater comfort. Interior polymer coating makes glove easy to put on. 100% nitrile to alleviate the potential for adverse reactions associated with latex protein. Textured fingers allow for reliable grip in wet and dry conditions. Gradient dipping provides added protection where you need it most. Available in four sizes; small, medium, large and extra-large. Supreno SE...
    • sup Fluid Reservoir Kit - 4.5 Oz
      sup Fluid Reservoir Kit - 4.5 Oz
      Manufacturers Part #: MVA6909
      Your Price: $6.52
      Use in-line with Mityvac hand vacuum/pressure pumps, to collect or dispense fluid. Replaces standard 4.5 oz. reservoirs included with hand pump kits. Kit includes: 4.5 oz (135 ml) capacity reservoir bottleFluid transfer lidFluid storage lid1/4" ID x 3-5/8" long (6.4mm ID x 90mm long) fluid pick-up tube Specifications: Weight: 4.4 oz. (125 g) Mityvac MVA6909 Fluid Reservoir Kit - 4.5 Oz ...
    • 1/4 In Dr Gearless Micro Ratchet
      1/4 In Dr Gearless Micro Ratchet
      Manufacturers Part #: 11200
      Your Price: $14.74
      Features: Chrome-molybdenum steel Slim head design Gearless ratchet design for smooth operation and less than 3 degree sweep makes this ratchet ideal for confined areas Re-usable storage tray U.S. Patent Re-usable storage tray Titan 11200 1/4" Drive Gearless Micro Ratchet ...
    • Hose Remover Pliers
      Hose Remover Pliers
      Manufacturers Part #: 47900
      Your Price: $10.94
      Engage the tube (line) with the black jaw. This sharpened jaw actually "DIGS" into the tube to grip it! Squeeze and the hose is easily pushed off by the silver jaw. Lisle 47900 Hose Remover Pliers ...
    • 3/8 In Drive 6 Pt Flex Std Metric Socket Set - 10-Pc
      3/8 In Drive 6 Pt Flex Std Metric Socket Set - 10-Pc
      Manufacturers Part #: 3910
      3/8" Drive 6 Pt Flex Metric Socket Set - 10-Pc 10 piece set is made in the U.S.A., featuring SK`s high polish SuperKrome finish, which protects the tools from the harsh working environments found in today`s workplace. All sockets feature SK`s patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is us...

    Customers Also Shopped For:

    • Oil Injector For R-134a
      Oil Injector For R-134a
      Manufacturers Part #: 34065
      Your Price: $83.50
      Here`s an easy way to add refrigeration oil to an A/C system during service--especially handy with flushing or retrofits when all oil has been removed from the system. It takes just seconds to transfer an oil charge while the system is in a vacuum. The injectors are great add-ons to recovery/recycling and charging. Installs in-line on the low side of the manifold. Made of durable polypropylene with oil levels marked in ounces and milliliters....
    • Pilot Bearing Puller w/Slide Hammer
      Pilot Bearing Puller w/Slide Hammer
      Manufacturers Part #: 28
      Your Price: $47.27
      Pilot Bearing Puller w/Slide Hammer 28 Removes bearings or bushings on flywheel, pump, generator,etc. Includes 1/2-in. to 1 3/8-in. (13mm to 32mm) I.D. capacity jaws. Includes 3lb. Slide Hammer Cal-Van Tools 28 Pilot Bearing Puller w/Slide Hammer  ...
    • Cotter Pin Hardware Kit - 560-Pc
      Cotter Pin Hardware Kit - 560-Pc
      Manufacturers Part #: W5205
      Your Price: $10.91
      You can never have to many cotter pins! This cotter pin kit is just the thing you need for any job you may encounter.  The kit includes a variety of sizes, which are 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2" and 2-1/2 ". Features: 560 Piece cotter pin hardware kit Made of Steel with a Cadmium plate finish Comes in a convenient resealable plastic case Hardware kit contains 6 different sizes of cotter pins Great for shop...
    • Pilot Bearing Puller 1/2 to 1 1/2 Inch
      Pilot Bearing Puller 1/2 to 1 1/2 Inch
      Manufacturers Part #: 1170
      Your Price: $73.25
      Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.Also very practical for pulling motor, generator, & magneto bearings. I.D. Max. Spread 1 1/2" I.D. Min. Spread 1/2" Reach 3/4" Weight 4 lbs. 14 oz. OTC 1170 Pilot Bearing Puller - 1/2" to 1-1/2" ...
    • 1/2" Compact Desiccant Dryer - 2 Qt
      1/2" Compact Desiccant Dryer - 2 Qt
      Manufacturers Part #: 1170-2
      Your Price: $249.83
      Delivers extremely dry compressed air as low as -30? F dew point without using electricity or refrigerant. Easy to monitor, when color changes in the sight glass from dark blue to pink, then it is time to change or dry the desiccant. To dry desiccant, remove from unit, bake at 275? F for 3 hours. To prolong the life of the unit, a 40 micron pre-filter, and .03 coalescing filter should precede dryer. Initial supply of desiccant is included. How de...
    • Deluxe Gel Knee Pads
      Deluxe Gel Knee Pads
      Manufacturers Part #: 7105
      Your Price: $19.10
      Deluxe Gel Knee Pads 7105 Super-Thick 1/2” High Density Closed-Cell Foam Large, Low-Profile Cap Designed To Prevent “Roll Over” Anti-Compression Air Injected Gel Easy-To-Use Velcro® Closures SAS Safety Corporation 7105 Deluxe Gel Knee Pads ...

    Current Reviews: 0