Spline Drive
Number 5 spline drive impact sockets in SAE and metric sizes and sets for truck wheel and heavy equipment work.
Similar Categories
Featured Products - Spline Drive
Spline Drive Impact Sockets
Spline drive refers to the drive end of the socket, not the fastener end. Instead of a square drive, these sockets have a splined bore that fits the number 5 spline anvil on large impact wrenches. The spline connection handles the very high torque of heavy truck and equipment work better than a square drive of similar size. Fleet and diesel shops, truck tire shops, mining and construction equipment mechanics and industrial maintenance crews use them most.
SAE, metric and sets
The category has three subcategories: SAE Individual, Metric Individual and Spline Sets. Individual sockets come in fractional sizes such as 1-1/4 in., 1-7/8 in. and 2-3/8 in., and in metric sizes such as 25 mm, 33 mm and 35 mm. Sets bring common truck wheel sizes together in SAE, metric or mixed fractional and metric kits.
Standard and deep
Standard length sockets keep the wrench close to the work and suit nuts with little stud showing. Deep sockets reach over long studs and around hub parts, which is common at truck wheel ends. Most sockets here are 6 point, which grips the flats of large nuts and resists rounding under heavy impact.
Using them
Check the anvil on the impact wrench before buying, since a number 5 spline socket fits only a number 5 spline drive. Keep the splines clean and the socket fully seated, and check the final torque on wheel nuts with a torque wrench rather than relying on the impact wrench. Inspect sockets for cracks and worn splines, and retire any that show damage before they fail on the job.
Brands include Genius, Grey, Sunex and K Tool. Square drive impact sockets, from 1/2 In Drive Impact Sockets to 1 In Drive Impact Sockets, are in the other Impact Sockets categories.

















Follow us on social media