Crankshaft Service Tools
Many engine jobs need the crankshaft held still, turned to a set position or fitted with a new seal. This category holds crankshaft seal installers and removers, crankshaft sockets and turning tools, counterholders, flywheel holders and top dead center tools. Engine builders, auto repair and dealership technicians and fleet shops use them during timing belt and chain jobs, seal replacement, clutch work and engine rebuilds.
Choosing the right type
Counterholders and flywheel holders lock the crankshaft so a tight pulley bolt or flywheel bolt can be loosened or torqued without the engine turning. Crankshaft sockets and turning tools fit the pulley bolt or snout so the engine can be rotated by hand to line up timing marks. Top dead center tools locate the crank position for timing work. Seal installers press a new front or rear crankshaft seal in straight and to the right depth, and seal removers pull the old one without scoring the crank.
Vehicle coverage
Many of these tools are made for one engine family or vehicle maker, and the product names show which, such as Opel and Vauxhall holding tools or Mopar essential tools. Confirm fit by engine and tool number before ordering, since a holder or installer for one engine rarely suits another.
Using them
Line the seal installer up with the crankshaft snout or flange and draw or press the seal in evenly. Lubricate seal lips only as the procedure calls for, and never pry a new seal into place. When rotating an engine by hand, turn it in its normal direction and stop if it binds. Remove holding tools before cranking the engine with the starter. Related tools are in Piston Ring Compressors and Hones And Stones.
Brands here include OTC, CTA, Kent-Moore, Mopar, Gedore and Assenmacher.


















![Chrysler Stub Shaft Oil Seal Protector [42LE] (image for) Chrysler Stub Shaft Oil Seal Protector [42LE]](images/prod_medium/111097-ms-Missing_Image_Image.webp)



























Follow us on social media