Engine Compression Testers
A compression tester threads into a spark plug hole and reads the peak pressure a cylinder builds while the engine cranks. This category holds complete compression test kits with a gauge, hoses and adapters for different spark plug threads and reaches, plus single gauges, replacement hoses and adapters.
How a compression test works
All spark plugs come out, the fuel and ignition are disabled, and the throttle is held open. The tester goes into one cylinder at a time and the engine cranks for a few strokes until the gauge needle stops rising. Readings are then compared between cylinders. Low or uneven readings point to worn rings, burnt or sticking valves or a failed head gasket. Two cylinders side by side that both read low can point to a head gasket between them. A wet test, with a little oil added to a low cylinder, helps tell ring wear from valve trouble.
Choosing a tester
Adapter coverage matters most: spark plug thread sizes and reach vary between engines, and some plugs sit deep in the head. A kit with several adapters and a long flexible hose fits more engines than a single gauge. A release valve on the gauge lets it be cleared between cylinders without disconnecting.
Auto repair technicians, engine rebuilders and small engine shops use compression testers when tracking down misfires, low power and oil burning. Brands we carry here include S&G Tool Aid, Lang, OTC, Mityvac, Lisle and Mopar. Related tools are in Cylinder Tools and Engine Leak Detectors.

















































Follow us on social media