Power Steering Testers and Service Tools
Power steering tools help a technician find and fix problems in a hydraulic steering system. This category holds power steering pressure testers, rack testers, pump pulley removers and installers, and fitting repair kits for steering lines. They are used in general auto repair, alignment and steering shops, and fleet service, wherever hard steering, noise or fluid leaks need to be tracked down.
How a power steering tester is used
A pressure tester connects into the high pressure line between the pump and the steering gear, with a gauge and a shutoff valve in between. Reading pressure with the valve open and then briefly closed, and while turning the wheel, helps tell a weak pump apart from a leaking rack or a sticking valve, so the right part gets replaced. Rack testers focus on the steering gear itself. Follow the vehicle service information for test steps and specs, and close the valve only for short periods.
Pulley and fitting tools
Many pump pulleys are pressed onto the shaft. A pulley remover pulls it off evenly without bending the pulley, and an installer presses it back to the correct depth so the belt lines up. Fitting repair kits help restore line connections without replacing a whole hose.
Brands here include OTC, SUR&R, Bosch, Lisle, Kent-Moore and S&G Tool Aid. Other test equipment, such as automotive scan tools, smoke leak detectors and multimeters, is in the neighboring diagnostic categories.












































Follow us on social media